The current disinfection method of vehicles being applied in South Korea has various shortcomings. So, the epidemic has generated continuously at livestock farms. It is very important to develop an effective disinfection system for reduction of the epidemic. And various basic data is required for this development. Therefore, this study was performed to identify the nozzle type and proper discharge pressure of sprayers. The experiment was conducted from January 10, 2012 until February 28, 2012. All the performance measurement experiments were repeated five times. The subjects of experiment were the A, B and C company’s products. The sprayed capacity, angle of spray and the covering area ratio were measured for each product. As a result, the sprayed capacity, angle of spray and the covering area ratio were increased as the discharge pressure of the sprayer was increased. In conclusion, the conical shaped of the nozzle is considered more appropriate than V-shaped, and the proper discharge pressure is expected to be at least 20kg/cm2.

• 장홍희(경상대학교 농업생명과학대학 축산학과(농업생명과학연구원)) | Hong-Hee Chang (Department of Animal Science, College of Agriculture and Life Sciences(Insti. of Agric. & Life Sci.), Gyeongsang National University, Jinju, 52828, Korea) Corresponding author
• 최충헌(경상대학교 농업생명과학대학 축산학과(농업생명과학연구원)) | Chung-Heon Choi (Department of Animal Science, College of Agriculture and Life Sciences(Insti. of Agric. & Life Sci.), Gyeongsang National University, Jinju, 52828, Korea)
• 이태훈(경상대학교 농업생명과학대학 축산학과(농업생명과학연구원)) | Tae-Hoon Lee (Department of Animal Science, College of Agriculture and Life Sciences(Insti. of Agric. & Life Sci.), Gyeongsang National University, Jinju, 52828, Korea)
• Winson M. Gutierrez(Central Mindanao 대학교 축산학과) | Gutierrez Winson M. (Department of Animal Science, College of Agriculture, Central Mindanao University, Maramag, 8700, Republic of the Philippines)
• 김석(경상대학교 수의과대학 수의학과(농업생명과학연구원)) | Suk Kim (Department of Veterinary Medicine, College of Veterinary Medicine(Insti. of Agric. & Life Sci.), Gyeongsang National University, Jinju, 52828, Korea)
• 강범선((주)에이치에스엠) | Beom-Sun Kang (HSM Co., LTD, Cheonan, 31246, Korea)
• 이승주(충남대학교 농업생명과학대학 바이오시스템기계공학과) | Seung-Joo Lee (Department of Biosystems Machinery Engineering, College of Agriculture and Life Sciences, Chungnam National University, Daejeon, 34134, Korea)
• 박동석(충남대학교 농업생명과학대학 바이오시스템기계공학과) | Dong-Suk Park (Department of Biosystems Machinery Engineering, College of Agriculture and Life Sciences, Chungnam National University, Daejeon, 34134, Korea)
• 김정철(충남대학교 농업생명과학대학 바이오시스템기계공학과) | Jeong-Chul Kim (Department of Biosystems Machinery Engineering, College of Agriculture and Life Sciences, Chungnam National University, Daejeon, 34134, Korea)
• 장동일(충남대학교 농업생명과학대학 바이오시스템기계공학과) | Dong-Il Chang (Department of Biosystems Machinery Engineering, College of Agriculture and Life Sciences, Chungnam National University, Daejeon, 34134, Korea)
• 임영일(충남대학교 농업생명과학대학 바이오시스템기계공학과) | Young-Il Lim (Department of Biosystems Machinery Engineering, College of Agriculture and Life Sciences, Chungnam National University, Daejeon, 34134, Korea)