논문 상세보기

Pyroprocess Experiments at ENEA Laboratories KCI 등재 SCOPUS

  • 언어ENG
  • URLhttps://db.koreascholar.com/Article/Detail/327487
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
방사성폐기물학회지 (Journal of the Korean Radioactive Waste Society)
한국방사성폐기물학회 (Korean Radioactive Waste Society)
초록

A new facility, known as Pyrel III, has been installed at ENEA laboratories for pyrochemical process studies under inactive conditions. It is a pilot plant which allows electrorefining and electroreduction experiments to be conducted on simulated fuel. The main component of the plant is a zirconia crucible. The crucible is heated by a furnace which is supported in an externally water-cooled well under the floor of a steel glove-box, where an argon atmosphere is maintained by a continual purge of about 10 L·min-1. The vessel is loaded with LiCl-KCl eutectic salt (59-41 mol%) and is currently operated at 460 °C. Several improvements on Pyrel II (the previous operating plant) have been introduced into Pyrel III. They are described in detail, together with the results from the first experimental campaign which used lanthanum metal.Moreover, studies about the treatment of chloride salt wastes from pyroprocesses have been conducted in parallel. They follow two main routes: on one hand, a matrix termed sodalite, a naturally occurring mineral containing chlorine, has been synthesized from a mix of nepheline, simulated exhausted salts and glass frit; on the other hand, a novel method proposed by Korea Atomic Energy Research Institute (KAERI) is under assessment. The final waste forms have been fully characterized with the support of the Politechnique of Milan, by means of density measurements, thermal analysis, and stereomicroscopy observations, FTIR, XRD, and RAMAN spectra, as well as leach tests under static conditions.

저자
  • Giorgio DE ANGELIS(Retired from Italian National Agency for New Technology, Energy and Sustainable Economic Development (ENEA), Casaccia Research Center, Via Anguillarese 301, 00123 S. Maria di Galeria, Roma, Italy) Corresponding author
  • Elio BAICCHI(ENEA, Brasimone Research Center, Bacino del Brasimone, 40032 Camugnano (Bologna), Italy)
  • Mauro CAPONE(ENEA, Casaccia Research Center, Via Anguillarese 301, 00123 S. Maria di Galeria, Roma, Italy)
  • Carlo FEDELI(ENEA, Casaccia Research Center, Via Anguillarese 301, 00123 S. Maria di Galeria, Roma, Italy)
  • Massimo SEPIELLI(ENEA, Casaccia Research Center, Via Anguillarese 301, 00123 S. Maria di Galeria, Roma, Italy)
  • Giuliano TIRANTI(ENEA, Casaccia Research Center, Via Anguillarese 301, 00123 S. Maria di Galeria, Roma, Italy)
  • Mirko DA ROS(Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Piazza L. da Vinci 32, 20133 Milano, Italy)
  • Francesca GIACOBBO(Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Piazza L. da Vinci 32, 20133 Milano, Italy)
  • Marco GIOLA(Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Piazza L. da Vinci 32, 20133 Milano, Italy)
  • Elena MACERATA(Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Piazza L. da Vinci 32, 20133 Milano, Italy)
  • Mario MARIANI(Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Piazza L. da Vinci 32, 20133 Milano, Italy)