Metal matrix composites(MMC) can obtain mechanical characteristics of application purposes that a single material is difficult to obtain. Al2 O3/AC8A composites were fabricated by low pressure infiltration process. The purpose is establishing the optimal casting conditions for composite preparation under low pressure. It is known the inorganic binder help infiltration. Therefore Al2O3 fiber preform's optimum sinter temperature is 1160℃, added inorganic binder is mixed binder(SiO2 sol:Al2O3 sol=5:2). And three fibers have been compared (Al2O3 80%/SiO2 20%, Al2O3 80%/SiO2 10% and Al2O3 97%/SiO2 3%). Al2O3/AC8A composites was made by each melting temperatures(650℃, 700℃, 750℃) and wear test was performed about effect of temperatures, kind of fiber, matrix and composites, aging time. Wear test is Ball on disk wear test. The resistance increased with the low melting temperature and Al2O3 80%/SiO2 20% fiber.

• S.H. Park(Department of Shipbuilding & Marine Mechanics, Changwon MoonSung University) | 박성호
• G.W. Hwang(Subdivision of Mechanical Engineering, Kyungnam College of Information & Technolgoy) | 황규완
• W.J. Park(Department of Energy and Mechanical Engineering, Gyeong Sang National University) | 박원조 Corresponding Author