Effect of Planting Density and Seeding Date on the Tiller Aspect and Growth Characteristics of Proso Millet (Panicum miliaceum L.)
The subject of this experiment is to supply basic data to inhibit non-productive tillers which are uneconomical for mechanical harvesting and to evaluate optimum planting density and sowing date in central district. Total number of tillers and effective first and second of tillers according to different planting density was higher in 80 ㎝ ridge than 60 ㎝ ridge in proso millet. The wider between plant distance on the ridge, the more increased total number of tillers and effective first and second of tillers. The highest effective tillers (91.7 %) in the first tillers was obtained from the second sowing date (23 May) among different sowing date and next is in the order of 3 rd (13 June, 89.8%) > 1 st (2 May, 85.6%) > 4 th (4 July, 85.2%). The percentage of effective tillers in the second tillers was decreased in the order of 2 May (53.7%), 23 May (40.7%), 13 June (22.2%), 4 July (0%) as the sowing date was delayed. There was no significant difference in days to heading and days to ripening according to different planting density. Although culm length was increased as planting density was increased, whereas number of tillers, stem diameter, ear length, grains per ear and 1000 grain weight was decreased. In the growth and yield characteristics of proso millet according to different sowing date, days to heading and days to ripening, culm length, stem diameter, ear length, grains per ear and yield per 10a were decreased. After the sowing date of 13 June, the reduction of growth and yield characteristics were higher because of excess-moisture injury.