The object of research is based on 1.5 MW wind turbine blade. This paper has carried out the aerodynamic shape optimization design of wind turbine blade. Based on the aerodynamic basic theory of wind turbine blade design and combined with particle swarm optimization algorithm(PSO), the design optimization model of the aerodynamic shape of blade is established. Through this study, the optimization results of the angle inducing ′ and tangential inducing  were obtained. The calculation programs are written and calculated chord length and torsion angle of the blade used by ′ and . The calculation result for the optimized wind turbine was 1.38 MW when the wind speed was 16 m/s. The 8 % error could be considered as an engineering acceptable error and the calculated values can be proved the correctness of the design value.

• 리껀(Kunsan National University) | Gen-Li
• 박명성(Kunsan National University) | Myeong-Seong Park
• 임신택(APS Co.,Ltd.) | Shin-Teak Lim
• 김영철(Kunsan National University) | Young-Chul Kim
• 백태현(Member, Kunsan National University) | Tae-Hyun Beak Corresponding author