논문 상세보기

밀도와 흡수율을 고려한 제강슬래그 아스팔트 콘크리트의 배합설계 방법 연구 KCI 등재

A Study on a Steel Slag Asphalt Concrete Design Method Considering Density and Absorption

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/341309
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국도로학회논문집 (International journal of highway engineering)
한국도로학회 (Korean Society of Road Engineers)
초록

PURPOSES: This paper presents a mix design method for using steel slag as an aggregate for asphalt mixtures.
METHODS: Steel slag has a different density and absorption rate than natural aggregates. The asphalt content was calculated according to the steel slag characteristics, and the formula for aggregate-gradation correction was presented.
RESULTS: The asphalt mix was designed using the proposed equations. Using the proposed mix design method, it was possible to design the asphalt mixture according to the target-usage amount of the recycled aggregate.
CONCLUSIONS: The suggested method can be used for asphalt mix design using aggregates with different densities and absorption rates. It is expected to contribute to quality improvement by ensuring accurate calculation of mixing ratios for steel slag asphalt mixtures.

목차
ABSTRACT
 1. 서론
  1.1. 논문개요
 2. 제강슬래그 골재를 사용한 배합설계
  2.1. 제강슬래그 골재의 기본 물성
  2.2. 추정 아스팔트 함량 결정
  2.3. 슬래그 골재가 혼합된 합성입도 결정
  2.4. 배합설계
 3. 시험포장
  3.1. WC-1 슬래그 아스팔트 콘크리트 시험 포장
  3.2. 10mm 슬래그 아스팔트 콘크리트 시험 포장
 4. 결론
 REFERENCES
저자
  • 김경남(경기대학교 토목공학과 박사과정) | Kim, Kyungnam
  • 조신행(경기대학교 토목공학과 공학박사) | Jo, Shinheang
  • 김낙석(경기대학교 토목공학과 교수) | Kim, Nakseok
  • 김현욱(포스코건설 R&D CENTER P4) | Kim, Hyunwook 교신저자