Comparison of the Overall Migration Values from Various Plastic Food Packaging Materials into Food Simulants Under High Temperature Testing Conditions as Described in the Regulations of Different Country areas
The actual overall migration data obtained from plastic food packaging materials into food simulants under high temperature testing conditions as described in the regulations of European Union, USA, and Korea or Japan were compared. Overall migration values(OMVs) with non-fatty food simulants under high temperature conditions were observed to be generally below 2.5 mg/dm^2 except polyamides(CPA and PA 6,6) which were tested at 121 for 2 hrs. As for the fatty food simulants, the OMVs with soybean oil were higher than other simulants. Among the films tested, PVC wrap showed higher OMVs ranging betwn 23.9 and 54.6 mg/dm^2 than others. The OMVs were measured at higher level with the elevation of contact temperature and the extension of contact time, and in fatty food simulants rather than in non-fatty simulants. Under similar testing temperature and time conditions. the OMVs tended to be increased in polar films like PA with polar simulants, and contrarily in non-polar films like PO with non-polar simulants. It is noteworthy that a discrepancy with regard to the result of OMVs was observed for some films as a result of different migration testing methods and conditions of each country areas.