논문 상세보기
pp.319-328
Per capita nail-products use and airborne VOCs emission in four techniques of nail care (full coat coloring, UVgel polish, repair silk, and acrylic overlay) are estimated in this study. These assessments were carried out in a sealed test chamber using artificial hand and nails. A polish remover and a gel cleanser as cleanser and acrylic liquid as solvent were the most commonly used nail products in all 4 of the nail care techniques. Acetone, isopropyl alcohol, and methanol, which are major components of a polish remover, were commonly detected in all nail care techniques while acetone was detected the most. In addition to these airborne VOCs, a variety of other components such as ethyl acetate, cyclohexane, and toluene were identified in full coat coloring technique. In the process of UV-gel polish care technique, the main airborne VOCs were caused by solvents and were not involved in the curing process of UV gels (base gel and top gel) and gel bonder. In the case of repair silk nail care techniques, which generated the most VOCs, the total amount of VOCs detected was about 1,118.8 ± 359.6 mg/capita. Of the VOCs, butane (862.2 ± 283.9 mg/capita), which is contained in glue dryer, represented the largest share. In the process of acrylic overlay nail care technique, ethyl methacrylate (EMA), which is the basic element of acrylic, and highly toxic methyl methacrylate (MMA) were detected at 396.6 ± 42.3 mg/capita and 141.8 ± 8.2 mg/capita, respectively. The per capita data is very useful in designing a ventilation system for environmental improvement of a nail shop and setting a health care policy for nail artists and customers.
2. 연구 방법
2.1 재료 및 장치
2.2 네일 관리기법별 시술과정
2.3 인조 손톱 면적 측정
2.4 원료 사용량 측정
2.5 VOCs 분석
2.6 분석방법
3. 연구 결과 및 고찰
3.1 네일 관리기법별 네일 관리용품의 사용량
3.2 네일 관리기법 별 VOCs 발생량
4. 결 론
Reference
