This study was performed in order to obtain the effect of the compressive strength of the cured product with manufacturing conditions (amounts of fine aggregate and different types of alkali activator). Material which is the basis of the cured product was used for the blast furnace slag, which has a latent hydraulic activity. Consequently, when using sodium hydroxide as the alkali activator, it is possible to obtain a higher compressive strength than using the calcium hydroxide. And also, it can be added a 10% of fine aggregate with blast furnace slag to improve the compressive strength.

1. 서 론
 2. 실 험
  2.1 실험재료
  2.2 실험방법
 3. 결과 및 고찰
  3.1 알칼리 활성화제 종류에 비율에 따른 압축강도 비교
  3.2 알칼리 활성화제를 추가하였을 경우 압축강도 비교
  3.3 고로슬래그와 잔골재의 비율에 따른 영향
 4. 결 론
 References

• 신재란((주)애니텍 기술연구소) | Shin Jae-Ran (Technology Institute, Anytech Co.) Corresponding author
• 이주열((주)애니텍 기술연구소, 경희대학교 환경응용과학과) | Lee Ju-Yeol (Technology Institute, Anytech Co., Ltd, Dept. of Applied Environmental Science, Kyung Hee University)
• 박병현((주)애니텍 기술연구소) | Park Byung-Hyun (Technology Institute, Anytech Co., Ltd)