논문 상세보기

E-Prime에 기반한 손가락 촉각 자극기의 개발

Development of a Finger Tactile Stimulator Based on E-Prime Software

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/355464
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국산업경영시스템학회 (Society of Korea Industrial and Systems Engineering)
초록

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.

저자
  • 김형식(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Hyung-Sik Kim
  • 민윤기(충남대학교 심리학과, Department of Psychology, Chungnam National University) | Yoon-Ki Min
  • 김보성(충남대학교 심리학과, Department of Psychology, Chungnam National University) | Bo-Seong Kim
  • 민병찬(한밭대학교 산업경영공학과, Department of Industrial & Management Engineering Hanbat National University) | Byung-Chan Min
  • 양재웅(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Jae-Woong Yang
  • 이수정(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Su-Jeong Lee
  • 최미현(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Mi-Hyun Choi
  • 이정한(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Jeong-Han Yi
  • 탁계래(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Gye-Rae Tack
  • 전재훈(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Jae-Hoon Jun
  • 정순철(건국대학교 의료생명대학 의학공학부, 의공학 실용기술 연구소, Department of Biomedical Engineering, Research Institute of Biomedical Engineering, College of Biomedical & Health Science, Konkuk University) | Soon-Cheol Chung 교신저자