In this study, field experiment, odor simulator, and dispersion modeling were used to evaluate the odor impact from J sewage sludge treatment facility. The height and flow rate of exhaust stack at this facility were 22.3 m and 100 Nm3/min. The mean odor concentrations of the wet scrubber inlet and exhaust stack were 267±160 and 93±44 OU/m3, respectively. The odor removal efficiency of wet scrubber showed 65%. The odor simulator is used for the regulated standard calculation of the exhaust pipe(stack). Resulting odor emission rate(OER) by odor simulator was 2.4×106(24,000 OU/m3). The forecasting result by Screen3 modeling showed that odor exhaust concentration up to 30,000 OU/m3 was’t exceeded maximum allowable emission level on site boundary(15 OU/m3).

1. 서론
 2. 자료 및 분석방법
  2.1. 연구대상 시설
  2.2. 복합악취 농도 분석
  2.3. 취기시뮬레이션
  2.4. SCREEN3 모델
 3. 결과 및 고찰
 3.1. 복합악취 농도
 3.2. 취기시뮬레이션에 의한 배출구의 규제기준
 3.3. Screen3 모델링에 의한 거리별 피해영향
 4. 결론
 감사의 글
 REFERENCES

• 박정호(경남과학기술대학교 환경공학과, Department of Environmental Engineering, Gyeongnam National University of Science and Technology) | Jeong-Ho Park Corresponding author
• 이형천(경남과학기술대학교 환경공학과, Department of Environmental Engineering, Gyeongnam National University of Science and Technology) | Hyung-Chun Lee