The seismic performance evaluation for the electrical cabinets is conducted by the shaking table test or numerical analysis. When performing the seismic evaluation by the numerical analysis, it usually assumes that the electrical cabinets are rigidly anchored to the floor. This assumption may not be valid depending on how the cabinets are anchored. In particular, if a cabinet is anchored with bolts, a local plastic deformation of the base plate of the cabinet may cause rocking. Therefore, in this study, the shaking table test was performed to analyze the rocking effect of the electrical cabinet in an experimental method.

Abstract
 1. 서 론
 2. 진동대 실험
 3. 결과 및 고찰
 참고문헌

• 김성완(부산대학교 지진방재연구센터) | Kim Sung Wan 교신저자
• 전법규(부산대학교 지진방재연구센터) | Jeon Bub Gyu
• 최인길(한국원자력연구원 구조지진안전연구실) | Choi In Kil
• 임승현(한국원자력연구원 구조지진안전연구실) | Eem Seung Hyun