In this study, We studied design method to reduce scattering reflection by adding a three - dimensional structure to light guide plate of LED backlight widely used in small and portable devices. In order to improve the efficiency of the light-incident part, a three-dimensional structure is used in which a repetitive structure of a prism shape and a semi-cylindrical shape is repeatedly added to the light-entering face in light-guide plate. As a result of the study, it was found that uniform luminance values were obtained in the light-incident portion and the backlight when a repetitive pattern of a semi-cylindrical shape was added as compared with a case in which a prism shape was added. Particularly, when a rectangular lens with a semi-cylindrical shape is added, the average value of the total luminance is increased by about 15% from 7278 lm to 8324 lm as compared with a general light guide plate.

ABSTRACT
 1. Introduction
 2. Experiment
 3. Results and Discussion
 4. Conclusion
 References

• Myung-Hyun Cho(Seoil University) | 조명현 Corresponding Author
• Ho-Young Lee(Chodang University) | 이호영