Density currents have been easily observed in environmental flows, for instance turbidity currents and pollutant plumes in the oceans and rivers. In this study, we explored the propagation dynamics of density currents using the FLOW-3D computational fluid dynamics code. The renormalization group (RNG) k-ε scheme, a turbulence numerical technique, is employed in a Reynold-averaged Navier-Stokes framework (RANS). The numerical simulations focused on two different types of intrusive density flows: (1) propagating into a two-layer ambient fluid; (2) propagating into a linearly stratified fluid. In the study of intrusive density flows into a two-layer ambient fluid, intrusive speeds were compared with laboratory experiments and analytical solutions. The numerical model shows good quantitative agreement for predicting propagation speed of the density currents. We also numerically reproduced the effect of the ratio of current depth to the overall depth of fluid. The numerical model provided excellent agreement with the analytical values. It was also clearly demonstrated that RNG k-ε scheme within RANS framework is able to accurately simulate the dynamics of density currents. Simulations intruding into a continuously stratified fluid with the various buoyancy frequencies are carried out. These simulations demonstrate that three different propagation patterns can be developed according to the value of hn/H : (1) underflows developed with hn/H=0 ; (2) overflows developed when hn/H=1 ; (3) intrusive interflow occurred with the condition of     .

Abstract
 1. Introduction
 2. Numerical methodology
  2.1. Overview of FLOW-3D code
  2.2. Governing equations
 3. Problem configuration and simulation cases
  3.1. IDC into a two-layer fluid
  3.2. IDC into a stratified fluid
 4. Results and discussion
  4.1. IDC into a two-layer fluid
  4.2. IDC into a stratified fluid
 5. Conclusions
 References

• Sangdo An(Korea Water Resources Corporation, 200, Sintanjin-ro, Daedeok-gu) Corresponding author