논문 상세보기
pp.397-403
The purpose of this study is to investigate weighted compaction density according to a loading density in truck, a compaction density of solid waste and composition ratios of solid waste for calculation of a capacity of the landfill sites. The experiments for calculations of in-place density at landfill site have been conducted in S landfill site at B City. The size of vessel for measuring the compaction density was 1m3(1m×1m×1m). The experiment tests have been carried out methods (1 time for bulldozer and 4 times for compactor) that do contain all of specification at the landfill site. Average of the loading density at the landfill site was 0.264 ton/m3 (0.113～0.487 ton/m³). When the loading density for each compositions was compared, the composition of the highest average loading density (0.474 ton/m³) was miscellaneous wastes. The composition of the lowest average loading density (0.120 ton/m³) was general solid waste. The reported results indicated that the compaction density at the landfill site was 0.538 ton/m³, which was calculated with weighted incoming ratios of compositions. The ranges of the density for each composition were from 0.021 ton/m³ to 0.221 ton/m³. When the compaction density for each composition was compared, the composition with the highest average compaction density (0.221 ton/m³) was miscellaneous wastes. The composition with the lowest average compaction density (0.021 ton/m³) was general solid wastes.
