This study is a basic research for the development of composite materials for 3D printing and evaluated the rheological properties according to the blending design of the constituent materials. As a result, as the W/B ratio becomes smaller, the plastic viscosity value and the yield value tend to increase. Next, the plasticity and flow characteristics were differently derived depending on the binders used, and all the binders were considered to have more influence on the yield value than the plastic viscosity value.

• 최명성(단국대학교 토목환경공학과) | Choi Myoung-Sung
• 이건우(동국대학교 안전공학과) | Lee Keon-Woo