논문 상세보기
자기연마를 이용한 난삭재 Tungsten Carbide Bar의 마이크로 초정밀가공 특성 KCI 등재
Characteristics of Ultra-Precision Micro Finishing for Difficult-To-Cut Tungsten Carbide Bar Material Magnetic Abrasive Finishing
- 언어KOR
- URLhttps://db.koreascholar.com/Article/Detail/380457
pp.580-586
Magnetic abrasive finishing (MAF) process is a surface improvement method, which the magnetic field of permanent magnet or electromagnet is used to control the abrasive particles during the finishing process. The magnetic abrasive tools are filled between the N-pole and S-pole of Nd-Fe-B type permanent magnets. Tungsten carbide bar (WC) is a high hardness material and its compressive strength is much higher than the other materials. Therefore, due to its superior mechanical properties, it has been widely used in cutting or machining process. Because the smooth surface of tungsten carbide is required in cutting tools, thus the magnetic abrasive finishing process was applied for achieving its surface accuracy and dimensional accuracy. The results showed that the surface roughness of tungsten carbide bar was improved from Ra: 0.23㎛ to Ra: 0.02㎛ in 120 sec by magnetic abrasive finishing process.
