논문 상세보기

고온 비대칭압연이 알루미늄 합금의 미세조직과 성형성에 미치는 영향 KCI 등재 SCOPUS

Effects of Hot Asymmetric Rolling on Microstructure and Formability of Aluminum Alloys

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/383113
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국재료학회지 (Korean Journal of Materials Research)
한국재료학회 (Materials Research Society Of Korea)
초록

In order to analyze the effect of hot asymmetric rolling on the microstructure and texture of aluminum alloy and to investigate the effect of the texture on the formability and plastic anisotropy of aluminum alloy, aluminum 6061 alloy is asymmetrically rolled at room temperature, 200 ℃, 350 ℃, and 500 ℃, and the results are compared with symmetrically rolled results. In the case of asymmetric rolling, the equivalent strain (εeq) is greatest in the upper roll part where the rotational speed of the roll is high and increases with increasing rolling temperature. The increase rate of the mean misorientation angle with increasing temperature is larger than that during symmetrical rolling, and dynamic recrystallization occurs the most when asymmetrical rolling is performed at 500 ℃. In the case of hot symmetric rolling, the {001}<110> rotated cube orientation mainly develops, but in the case of hot asymmetric rolling, the {111}<110> orientation develops along with the {001}<100> cube orientation. The hot asymmetric rolling improves the formability (r) of the aluminum 6061 alloy to 0.9 and reduces the plastic anisotropy (Δr) to near zero due to the {111}<110> shear orientation that develops by asymmetric rolling.

목차
Abstract
1.서 론
2. 실험방법
    2.1 비대칭압연과 대칭압연에 의한 시편 제조
    2.2 미세조직과 집합조직 분석
    2.3 성형성 분석
3. 결과 및 고찰
    3.1 미세조직과 집합조직
    3.2 성형성과 소성이방성
4.결 론
References
저자
  • 정무섭(충남대학교 신소재공학과) | Museob Jeong (Department of Materials Science and Engineering, Chungnam National University)
  • 이종범(한국생산기술연구원 융합공정소재그룹) | Jongbeom Lee (Advanced Process and Materials Group, Korea Institute of Industrial Technology)
  • 한준현(충남대학교 신소재공학과) | Jun Hyun Han (Department of Materials Science and Engineering, Chungnam National University) Corresponding author