논문 상세보기

CaCl2-CaF2-CaO 용융염에서 YSZ 세라믹의 고온 안정성에 미치는 성형공정의 영향 KCI 등재 SCOPUS

Effect of Pressing Process on the High-Temperature Stability of Yttria-Stabilized Zirconia Ceramic Material in Molten Salt of CaCl2-CaF2-CaO

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/389551
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국재료학회지 (Korean Journal of Materials Research)
한국재료학회 (Materials Research Society Of Korea)
초록

The high-temperature stability of YSZ specimens fabricated by die pressure and cold isostatic press (CIP) is investigated in CaCl2-CaF2-CaO molten salt at 1,150 °C. The experimental results are as follows: green density 46.7 % and 50.9 %; sintering density 93.3 % and 99.3 % for die press and CIP, respectively. YSZ foremd by CIP exhibits higher stability than YSZ formed by die press due to denseness dependency after high-temperature stability test. YSZ shows peaks mainly attributed to CaZrO3, with a small t-ZrO2 peak, unlike the high-intensity tetragonal-ZrO2 (t-ZrO2) peak observed for the asreceived specimen. The t-ZrO2 phase of YSZ is likely stabilized by Y2O3, and the leaching of Y2O3 results in phase transformation from t-ZrO2 to m-ZrO2. CaZrO3 likely forms from the reaction between CaO and m-ZrO2. As the exposure time increases, more CaZrO3 is observed in the internal region of YSZ, which could be attributed to the inward diffusion of molten salt and outward diffusion of the stabilizer (Y2O3) through the pores. This results in greater susceptibility to phase transformation and CaZrO3 formation. To use SOM anodes for the electroreduction of various metals, YSZ stability must be improved by adjusting the high-density in the forming process.

목차
Abstract
1. 서 론
2. 실험 방법
    2.1 시편 제조
    2.2 고온 안정성 실험
    2.3 특성 평가
3. 결과 및 고찰
    3.1 상대 밀도 분석
    3.2 안정성 거동
4. 결 론
References
저자
  • 김완배(충남대학교 신소재공학과) | Wan-Bae Kim (Department of Materials Science and Engineering, Chungnam National University)
  • 권숙철(충남대학교 신소재공학과) | Suk-Cheol Kwon (Department of Materials Science and Engineering, Chungnam National University)
  • 조수행(충남대학교 급속응고신소재연구소) | Soo-Haeng Cho (Rapidly Solidified Materials Research Center (RASOM), Chungnam National University)
  • 이종현(충남대학교 신소재공학과/충남대학교 급속응고신소재연구소/충남대학교 에너지과학기술대학원) | Jong-Hyeon Lee (Department of Materials Science and Engineering, Chungnam National University/Rapidly Solidified Materials Research Center (RASOM), Chungnam National University/Graduate School of Energy Science and Technology, Chungnam National University) Corresponding author