This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

Abstract
1. Introduction
2. Experiment
    2.1 Polymerization
    2.2 Experimental Analysis
3. Results and Discussion
    3.1 Fabrication and Polymerization Process
    3.2 Analysis of Synthesized Polymer through TGAAnalysis
    3.3 Polymerization Stability
    3.4 Physical Properties
    3.5 Optical Properties
    3.6 Surface Properties
4. Conclusion
References

• Min-Jae Lee(Department of Optometry & Vision Science, Daegu Catholic University)
• Ki-Oh Kong(Department of Optometry & Vision Science, Daegu Catholic University)
• A-Young Sung(Department of Optometry & Vision Science, Daegu Catholic University) Corresponding author