In this work, narrow-band green-emitting CsPbBr3 particles are embedded in commercialized glass composites by a facile dry process. By optimizing the method through sintering in glass frit (GF) composites including CsBr and PbBr2, used as precursors, the encapsulation of CsPbBr3 particles made them waterproof with green fluorescence. To improve the fluorescent properties by reducing aggregation of CsPbBr3, fumed silica (FS) is additionally used to help particles avoid bulking up in the glass matrix. The CsPbBr3 perovskite/glass composites are characterized using scanning electron microscopy (SEM) images and energy-dispersive X-ray spectroscopy (EDS) maps, which support the existence of CsPbBr3 particles in the glass matrix. The photoluminescence (PL) properties demonstrate that the emission spectrum peak, full width at half maximum (FWHM), and photoluminescence quantum yield (PLQY) values are 519 nm, 17 nm, and 17.7 %. We also confirm the water-resistant properties. To enhance water/moisture stability, the composite sample is put directly into water, with its PLQY monitored periodically under UV light.

Abstract
1.서 론
2. 실험 방법
3. 결과 및 고찰
4. 결 론
References

• 문나은(동의대학교 공과대학 응용화학과) | Na-eun Mun (Department of Applied Chemistry and Food Science Technology, Dong-Eui University)
• 김성훈(동의대학교 공과대학 응용화학과) | Sunghoon Kim (Department of Applied Chemistry and Food Science Technology, Dong-Eui University) Corresponding author