Stone cutting process that it became with the tree, after fixing with the neck which is was fixed the stone in portable type transfer and department with cutting department which is in the process of operating and it transferred it was in the process of moving with the method which cuts with hour vibration where the stone will reach to the saw blade it was caused by, the raw materials waste and the inferior good which under the actual conditions which are disconnected from the default location of the stone are caused by soaking pit of the stone were under occurring. Consequently objective of this research currently the fixation stone cutter which is used from the stone processing and cutting enterprise about lower the productivity falls on a large scale with fixation, the raw materials loss to be many is sufficient the satisfactory degree of the enterprise considerably and to be insufficient in order the problem which is like this to solve the new cutting technical develop.

• 김병삼(원광대학교) | Kim Byoung-sam Corresponding Author