논문 상세보기

폐수 처리를 위한 박테리아 셀룰로오스 막: 리뷰 KCI 등재

Bacterial Cellulose Membrane for Wastewater Treatment: A Review

  • 언어ENG
  • URLhttps://db.koreascholar.com/Article/Detail/412061
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
멤브레인 (Membrane Journal)
한국막학회 (The Membrane Society Of Korea)
초록

현재 우리 산업의 가속화된 발전으로 인해 다양하고 많은 양의 오염이 만들어지기 시작하고 있다. 특히 폐수의 경우 석유, 금속 및 유기물로 오염되는 강과 바다가 늘고 있으며, 빠른 조치가 필요해 보인다. 이러한 오염에 대응하기 위해 폐수에서 분리막을 이용한 깨끗한 물의 여과가 비용적으로 유리하고 친환경적인 기술로 떠오르고 있다. 재생 자원으로 만들 어진 막여과 기법들이 환경오염의 원인 중 하나인 합성고분자 분리막들을 대체하기 위해 많이 사용되고 있다. 박테리아 셀룰 로오스(Bacterial Cellulose / BC)는 순수하고 뚜렷한 형태의 셀룰로오스 나노섬유(Cellulose nanofibrils / CNF)이다. CNF에서 제조된 나노페이퍼는 각기 다른 용도로 한외여과막과 나노여과막으로 사용된다. BC의 높은 결정성으로 인해 폐수 처리 막의 필수 기준인 우수한 기계적 성질을 가질 수 있다. 본 리뷰 논문에서는 염료, 오일 및 중금속 등 폐수의 오염물질들을 걸러내기 위해 사용될 수 있는 BC 기반 분리막들에 대해 논의한다.

Growing pollution due to industrialization leads to difficulties in survival of mankind. Generation of clean water from wastewater by membrane separation process is emerging cost efficient technology. Membrane prepared from renewable resources are in lots of demand to reduce burden on synthetic polymers which is one of the source of environmental pollution. Bacterial cellulose (BC) is very pure and distinct form of cellulose nanofibrils (CNF). Nanopapers prepared from CNF are used ad ultrafiltration (UF) and nanofiltration (NF) membrane for different applications. High crystallinity of BC gives rise to excellent mechanical property, an essential criterion for wastewater treatment membrane. In this review, BC based membrane for application in dye, oil, heavy metal and chemical removal from wastewater is discussed.

목차
요 약
Abstract
1. Introduction
2. Wastewater treatment
    2.1. Dye removal
    2.2. Oil removal
    2.3. Heavy metal removal
    2.4. Chemical removal
3. Conclusions
Reference
저자
  • 장은조(연세대학교 언더우드학부 융합과학공학부) | Eun Jo Jang (Integrated Science and Engineering Division (ISED), Underwood International College, Yonsei University)
  • 라즈쿠마 파텔(연세대학교 언더우드학부 융합과학공학부 에너지환경융합전공) | Rajkumar Patel (Energy and Environmental Science and Engineering (EESE), Integrated Science and Engineering Division (ISED), Underwood International College, Yonsei University) Corresponding author