Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

서 론
재료 및 방법
결과 및 고찰
    1. 응답자의 일반적 특성
    2. 씨앵커의 제작업체별 점유 비율
    3. 각 부위별 사용용어 현황
    4. 본체와 연줄의 규격 현황
결 론
References

• 김남구(부경대학교 어업생산학과) | Namgu KIM (Department of Fishery Production, Graduate School of Global Fisheries, Pukyong National University, Busan 48513, Korea)
• 김형석(부경대학교 해양생산시스템관리학부) | Hyung-Seok KIM (Division of Marine Production System Management, Pukyong National University, Busan 48513, Kore)
• 이유원(부경대학교 실습선) | Yoo-Won LEE (Training Ship, Pukyong National University, Busan 48513, Korea)
• 류경진(부경대학교 실습선) | Kyung-Jin RYU (Training Ship, Pukyong National University, Busan 48513, Korea) Corresponding author