In this study, lenses are fabricated using various nanomaterials as additives to a silicone polymer made with an optimum mixing ratio and short polymerization time. In addition, PVP is added at a ratio of 1% to investigate the physical properties according to the degree of dispersion, and the compatibility with hydrophobic silicone and the possibility of application as a functional lens material are confirmed. The main materials are SIU as a silicone monomer, DMA, a hydrophilic copolymer, EGDMA as a crosslinking agent, and 2H2M as a photoinitiator. Holmium (III) oxide, Europium (III) oxide, aluminum oxide, and PVP are used. When Holmium (III) oxide and Europium (III) oxide are added based on the Ref sample, the characteristics of the lens tend to be similar overall, and the aluminum oxide shows a tendency slightly different from the previous two oxides. This material can be used as a silicone lens material with various nano oxides and polyvinylpyrrolidone (PVP) acting as a dispersant.

Abstract
1. Introduction
2. Experiment
    2.1. Reagents and Materials
    2.2. Photo Polymerization of Silicon Polymer
    2.3. Fabrication of Lenses Containing Nano-Oxideand PVP
    2.4. Measuring Device and Methods
3. Results and Discussion
    3.1. Physical Properties of Polymerized SiliconeLenses
    3.2. Properties of Lenses containing Nano-Oxideand PVP
4. Conclusion
Acknowledgement
References

• Ji-Won Heo(Department of Optometry & Vision Science, Daegu Catholic University, Gyeongsan, 38430, Republic of Korea)
• A-Young Sung(Department of Optometry & Vision Science, Daegu Catholic University, Gyeongsan, 38430, Republic of Korea) Corresponding author