논문 상세보기

폐 플로랄 폼을 이용한 슈퍼커패시터용 다공성 탄소 폼 제조 및 전기화학 성능 평가 KCI 등재 SCOPUS

Preparation and Electrochemical Characterization of Porous Carbon Foam from Waste Floral Foam for Supercapacitors

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/416819
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국재료학회지 (Korean Journal of Materials Research)
한국재료학회 (Materials Research Society Of Korea)
초록

The recycling of solid waste materials to fabricate carbon-based electrode materials is of great interest for low-cost green supercapacitors. In this study, porous carbon foam (PCF) was prepared from waste floral foam (WFF) as an electrode material for supercapacitors. WFF was directly carbonized at various temperatures of 600, 800, and 1,000 oC under an inert atmosphere. The WFF-derived PCF (C-WFF) was found to have a specific surface area of 458.99 m2/g with multi-modal pore structures. The supercapacitive behavior of the prepared C-WFF was evaluated using a three-electrode system in a 6 M KOH aqueous electrolyte. As a result, the prepared C-WFF as an active material showed a high specific capacitance of 206 F/g at 1 A/g, a rate capability of 36.4 % at 20 A/g, a specific power density of 2,500 W/kg at an energy density of 2.68 Wh/kg, and a cycle stability of 99.96 % at 20 A/g after 10,000 cycles. These results indicate that the C-WFF prepared from WFF could be a promising candidate as an electrode material for high-performance green supercapacitors.

목차
Abstract
1. 서 론
2. 실험 및 분석 방법
3. 결과 및 고찰
4. 결 론
Acknowledgement
References
저자
  • 이병민(충남대학교 고분자공학과) | Byoung-Min Lee (Department of Polymer Science and Engineering, Chungnam National University,)
  • 박진주(충남대학교 고분자공학과) | Jin-Ju Park (Department of Polymer Science and Engineering, Chungnam National University,)
  • 박상원(충남대학교 바이오응용화학연구소) | Sang-Won Park (Institute of Chemical and Biological Engineering, Chungnam National University)
  • 윤제문(동의대학교 신소재공학부) | Je Moon Yun (Division of Advanced Materials Engineering, Dong-Eui University,) Corresponding author
  • 최재학(충남대학교 고분자공학과) | Jae-Hak Choi (Department of Polymer Science and Engineering, Chungnam National University,) Corresponding author