PURPOSES : In this study, a system is investigated and developed to remove fog by injecting air onto a road using high-pressure air generated by turbo blowers installed on both edges of the road without using artificial chemicals.
METHODS : A test device was constructed on a scaled road measuring 5 m long. A 225 kW class turbo blower was used to supply air. An air injection nozzle was installed to allow high-pressure air supplied from the turbo blower to be sprayed vertically from the edge of the road and horizontally from the surface of the road. Ten micro humidifiers were used to generate fog.
RESULTS : Experimental results show that when ground fog occurs on the road, spraying air only in the vertical direction cannot effectively remove the fog. However, when vertical and horizontal nozzles are used simultaneously, both ground fog and flowing fog are removed effectively.
CONCLUSIONS : A system for removing fog by spraying air jet is constructed, and fog is generated using a micro humidifier. Results from the fog removal performance test show that the system effectively removes fog.

ABSTRACT
1. 서론
    1.1. 연구의 배경 및 목적
2. 연구 내용 및 실험방법
    2.1. 공기분사 노즐 연구
    2.2. 소형 테스트 베드 구축
3. 실험 결과
    3.1. 공기분사노즐 성능 평가
    3.2. 안개발생 상황 모사 및 제거 능력 실험
4. 결론
    4.1. 연구 결과
REFERENCES

• 최성만(전북대학교 항공우주공학과 교수) | Choi Seongman
• 문성재(전북대학교 항공우주공학과 석사과정) | Moon Seongjae
• 은윤기(전북대학교 토목·환경·자원에너지공학부 박사과정) | Eun Yunkii
• 이재준(전북대학교 토목·환경·자원에너지공학부(토목전공) 방재연구센터 교수) | Lee Jaejun Corresponding author