논문 상세보기

In situ synthesis of MgWO4– GO nanocomposites and their catalytic effect on the thermal decomposition of HMX, RDX and AP KCI 등재

  • 언어ENG
  • URLhttps://db.koreascholar.com/Article/Detail/420529
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
Carbon Letters (Carbon letters)
한국탄소학회 (Korean Carbon Society)
초록

For solving phase separation of nanoparticles and graphene oxide (GO) in the application process, MgWO4– GO nanocomposites were successfully synthesized using three different dispersants via a facile solvothermal-assisted in situ synthesis method. The structure and morphology of the prepared samples were characterized by X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy, Fourier transform infrared and Raman techniques. The experimental results show that MgWO4 nanoparticles are tightly anchored on the surfaces of GO sheets and the agglomeration of MgWO4 nanoparticles is significantly weakened. Additionally, MgWO4– GO nanocomposites are more stable than self-assembly MgWO4/ GO, which there is no separation of MgWO4 nanoparticles and GO sheets by ultrasound after 10 min. The catalytic results show that, compared with bare MgWO4, MgWO4– GO nanocomposites present better catalytic activities on the thermal decomposition of cyclotetramethylenete tranitramine (HMX), cyclotrimethylene trinitramine (RDX) and ammonium perchlorate (AP). The enhanced catalytic activity is mainly attributed to the synergistic effect of MgWO4 nanoparticles and GO. MgWO4– GO prepared using urea as the dispersant has the smallest diameter and possesses the best catalytic action among the three MgWO4– GO nanocomposites, which make the decomposition temperature of HMX, RDX and AP reduce by 10.71, 11.09 and 66.6 °C, respectively, and the apparent activation energy of RDX decrease by 68.6 kJ mol−1.

목차
    Abstract
    1 Introduction
    2 Experimental section
        2.1 Reagents and materials
        2.2 Preparation of GO and MgWO4–GO nanocomposites
        2.3 Materials characterization
        2.4 Catalytic activity measurements
    3 Results and discussion
        3.1 Materials characterization
        3.2 Content analysis of oxide
        3.3 Effect on the thermal decomposition of HMX and RDX
        3.4 Effect and catalytic mechanism on the thermal decomposition of AP
    4 Conclusion
    Acknowledgements 
    References
저자
  • Jingjing Wang(School of Chemical Engineering, Northwest University)
  • Weimin Wang(School of Chemical Engineering, Northwest University)
  • Jinghua Wang(School of Chemical Engineering, Northwest University)
  • Kangzhen Xu(School of Chemical Engineering, Northwest University)