논문 상세보기
Study on Test Requirements Applied to Immobilized Solid Form
p.284
The disposal criteria of the domestic LILW disposal facility specifies that fluidized substances such as the spent resin, the evaporator bottom should be solidified in a physically stable solid form, such as cementation and polymerization. And the solidified form applies requirements for compressive strength, immersion test, thermal circulation test, radiation irradiation test, leaching test, and free standing water measurement test. On the other hand, it is specified that immobilization iss applied to wastes with a total radioactivity concentration of more than 74,000 of radionuclides with a half-life exceeding 20 years among non-homogeneous wastes such as spent filters and DAW, but the test requirements are not applied. Nevertheless, it is necessary for waste generator to establish quality control standards for the manufacture of immobilized solid form through reviewing overseas cases and domestic regulations and technical standards. The test requirements for solidified solid form require measurement of structural stability (compressive strength, immersion, thermal cycling, irradiation test), leachability (leaching test), and free standing water measurement. A characteristic of the immobilized solid form is that it is not mixed with the waste and that the cement medium surrounds the waste. Therefore, the structural soundness is higher than that of the solidified solid mixed with waste. In addition, even when in contact with water, the cement medium blocks the contact between waste and water, thereby preventing the spread of radionuclides. Therefore, considering the characteristics of these immobilized solid form, compressive strength test and free standing water measurement are applied for structural soundness. For other tests, it is determined that application is unnecessary.
