Recently, it is being carried out the project to evaluate the properties of materials harvested from nuclear reactor after the decommissioning of Kori Unit 1. However, it is not sufficient adequate machining equipment and remote machining technique to perform the projects for evaluation of materials harvested from nuclear reactor. Thus, it is required to develop the remote machining technique in hotcell to evaluate the mechanical properties of nuclear reactor materials. The machining technique should be performed inside a hotcell to evaluate mechanical properties of materials harvested from nuclear reactor and is essential to prevent radiation exposure of workers. Also, it is essential to design the apparatus and develop the machining process so that it can be operated with a manipulator and minimize contamination in hotcell. In this research, development of remote specimen machining technique in hotcell such as machining apparatus, technique and process for compact tension specimens of material harvested from nuclear reactor are described. Remote machining technique will be useful in specimen machining to evaluate changes in mechanical properties of materials harvested in high-radioactive reactor. Also, it is expected that various types of specimens can be machining by applying the developed machining technique in the future.

• Kisoo Heo(Korea Atomic Energy Research Institute (KAERI)) Corresponding author
• Younggwan Jin(Korea Atomic Energy Research Institute (KAERI))
• Seungje Baik(Korea Atomic Energy Research Institute (KAERI))
• Minchul Kim(Korea Atomic Energy Research Institute (KAERI))