논문 상세보기
Study on Creating and Optimizing a Task Sequence for Robotic Underwater Laser Cutting Using a Digital Manufacturing System
- 언어ENG
- URLhttps://db.koreascholar.com/Article/Detail/430142
p.353
This study presents an example of creating and optimizing a task sequence required in an automated remote dismantling system using a digital manufacturing system. An automated remote dismantling system using a robotic arm has recently been widely studied to improve the efficiency and safety of the dismantling operations. The task sequence must be verified in advance through discrete eventbased process simulation in a digital manufacturing system to avoid problems in actual remote cutting operations as the main input of the automated remote dismantling system. The laser cutting method can precisely cut complicated target structures such as reactor internals with versatility, but a robot and a pre-prepared program are required to deploy sophisticated motion of the laser cutting head on the target structure. For safe and efficient dismantling operations, the robot’s program must be verified in advance in a virtual environment that can represent the actual dismantling site. This study presents creating and optimizing the task sequence of a robotic underwater laser cutting as part of the project of developing an automated remote dismantling system. A task sequence is created to implement the desired cutting path for the target structure using the automated remote dismantling system in the virtual environment. The task sequence is optimized for the posture of the laser cutting head and the robot to avoid collisions during the operation through discrete event-based process simulation since the target structure is complicated and the volume occupied by the laser cutting head and the robot arm is considerably large. The task sequence verified in the digital manufacturing system is demonstrated by experiments cutting the target structure along the desired cutting path without any problems. The various simulation cases presented in this study are expected to contribute not only to the development of the automated remote dismantling system, but also to the establishment of a safe and efficient dismantling process in the nuclear facility decommissioning.
