Spent filters contained in drums of radioactive waste generated from nuclear power plants are contaminated with various radioactive isotopes due to their use in various water purification processes in the system. Radiation doses from the spent filters can vary from low to high levels. To dispose of drums containing spent filters as radioactive waste, the inventory of radioactive isotopes in the filters must be determined. Two methods for determining the inventory are indirect measurement using scaling factors and direct analysis of filter samples. This study suggests a method to determine the appropriate sample size for each drum based on the number of filters stored in the drum, when direct analysis is used to determine the inventory of radioactive isotopes. In particular, Visual Sample Plan (PNNL) software’s Item Sampling function was used to calculate the sample size, considering the confidence level and minimum acceptable coverage rate. As a result, assuming that the number of filters packed per drum ranges from a minimum of 1 to a maximum of 30, the study suggests that a full inspection is required for drums containing 9 or fewer filters, while drums containing 10 filters should be sampled with 9 samples, 11 filters with 10 samples, 12-13 filters with 11 samples, 14-16 filters with 12 samples, 19-22 filters with 14 samples, 23-26 filters with 15 samples, and 27-30 filters with 16 samples.

• Jisoo Yoon(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI)) Corresponding author
• Kyung Rock Park(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI))
• Jung-Kwon Son(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI))