Research on alternative fumigants to replace methyl bromide (MB), a harmful ozone-depleting substance and highly toxic pesticide, began in 2007. Initial tests focused on using ethyl formate for fruits and EDN for wood. Subsequently, alternative techniques were developed for a total of 94 plant types using ethyl formate, EDN, and phosphine, demonstrating Korea's superior performance compared to other countries, especially in practical applications. However, when it comes to wood products, the primary users of methyl bromide, EDN is scarcely used due to concerns about worker safety. An emerging alternative to MB is sulfuryl fluoride (SF), widely employed in North America to control wood-damaging pests like termites. SF's advantages include a lower boiling point and higher vapor pressure, making it effective against wood pests. Yet, certain bark beetle eggs require higher doses and longer treatment periods, resulting in established international standards (e.g., 120g/m3 for 48 hours at 20℃), posing challenges for field applications. Recently, the APQA initiated basic research to apply SF to wood. They are assessing SF's effectiveness against various wood-destroying pests, including termites, bark beetles, and long horn beetles, while also evaluating the feasibility of mixed treatments to reduce dosage. Once SF fumigation standards are established, it is expected to significantly reduce methyl bromide use in commonly used wood types, contributing to ozone layer protection and enhancing fumigation work safety.

• Min-Goo Park(Department of Bioenvironmental Chemistry, Jeonbuk National University) Corresponding author