Numerous research institutes have been studying semiconductor devices using two-dimensional materials for several years. However, the findings of these studies have yet to demonstrate the performance of digital devices that could replace silicon devices in the semiconductor industry. Nonetheless, the high carrier mobility and saturation velocity of 2-D materials remain attractive for semiconductor device performance, particularly in analog devices where these features can be utilized. In this research, we fabricated a phase-shift controller, a typical component of analog circuits, using 2-D materials and verified its operational characteristics. Analog circuits do not require large area integration, so we employed graphene, which has relatively simple formation and processing, as the 2-D material. Devices using graphene as a channel exhibit a V-shaped I–V characteristic, allowing for the input voltage to be adjusted to produce various modes of output characteristics. This means that the same devices can generate a phase-shifted output and an output with double the frequency by simply adjusting the input voltage range. This research is particularly meaningful since it demonstrates not only the potential of 2-D materials but also their potential for direct application to the semiconductor industry. These findings will contribute to the development of system IC technology and various applications.

Phase-shift controller for analog device application using 2-D material
    Abstract
    1 Introduction
    2 Experiment
    3 Results and discussion
    4 Conclusions
    Acknowledgements 
    References

• Jong Kyung Park(Department of Semiconductor Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea)
• Seul Ki Hong(Department of Semiconductor Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea) Corresponding author