This study was conducted using mold heat. By developing the cleaning process technology, the production test was improved by twice, and the heat washing time reduction test and defect rate were also reduced. We designed an automatic production system for automatic heat torches and devised an automated continuous process system to improve the mold process. The production capacity test doubled the production rate of the product per 1 hour from the target of 500 to 1,040 per hour, and the heat cleaning time reduction test measured the time from the beginning of heat injection to the product sample during the production process and the end time, which shortened the development target of 5 seconds (sec) to 2.78 seconds (sec), and the defect rate was reduced to 4.25% as a result of the defect rate test. The system development of this project has doubled the production volume

Abstract
1. 서 론
2. 기술개발목 표 및 기술내용
    2.1 기술개발목 표
3. 시험방법 및 성능시험
    3.1 시험방법
4. 결 론
References

• 이원섭(Dept. of Mechanical & Biomedical Engineering Gangneung Wonju National University Gangwondo) | W. S. LEE Corresponding author
• 이재준(Mechanical & Biomedical Engineering Gangneung Wonju National University) | J. J. LEE