논문 상세보기

플래쉬 램프 어닐링 기반 초고속 이황화몰리브덴 합성 KCI 등재

Ultrafast Synthesis of Molybdenum Disulfide via Flashlamp Annealing

양찬현, 이재학, 박정환
  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/449261
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국분말재료학회(구 한국분말야금학회) (Korean Powder Metallurgy Institute)
초록

This study presents the synthesis of molybdenum disulfide (MoS₂) using flashlamp annealing and provides a comprehensive investigation of its structural and physical properties. The proposed flash-induced approach enables rapid production of high-quality MoS₂, offering superior process efficiency compared to conventional synthesis techniques. The structural, electronic, and thermal characteristics of the synthesized MoS₂ were systematically examined using multiple analytical methods, with particular attention to how synthesis conditions influence layer structure, crystallinity, and defect density. The results indicate that MoS₂ produced through this method exhibits material properties suitable for high-performance electronic devices and energy storage applications. Moreover, this work demonstrates the potential of flash-induced synthesis for scalable and practical fabrication of MoS₂-based nanomaterials, thereby contributing to the broader advancement of transition metal dichalcogenide technologies across diverse nanotechnology applications.

키워드
FlashlampPhotothermal annealingMoS2 synthesisTransition metal dichalcogenide
목차
1. Introduction 
2. Experimental Section 
    2.1 전구체의 유리기판 스핀 코팅 
    2.2 MoS₂ 합성을 위한 플래쉬 챔버 가열 후 플래쉬광 조사 
    2.3 MoS₂ 특성 분석 
3. Results and Discussion 
4. Conclusion 
Funding
Conflict of Interest 
Data Availability Statement 
Author Information and Contribution 
Acknowledgments
References
저자
  • 이재학(한국생산기술연구원 인간중심생산기술연구소 자율형제조공정연구부문) | Jaehak Lee (Autonomous Manufacturing & Process R&D Department, Korea Institute of Industrial Technology (KITECH), Ansan 15588, Republic of Korea) Corresponding author
  • 양찬현(금오공과대학교 기계공학과 항공기계전자융합전공) | Chan Hyeon Yang (Department of Mechanical Engineering (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Technology, Gumi 39177, Republic of Korea)
  • 박정환(금오공과대학교 기계공학과 항공기계전자융합전공) | Jung Hwan Park (Department of Mechanical Engineering (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Technology, Gumi 39177, Republic of Korea) Corresponding author