Evaluation of Red Rust Area Ratio and Rating Number for Greenhouse Saddle Clamps Based on HSV-RGB Image Analysis
농업용 온실 구조물은 고온·다습한 환경에 노출되어 금속 체 결 부품의 부식이 빠르게 진행되며, 이는 구조적 안정성을 저하 시키는 주요 원인이 된다. 기존의 육안 기반 부식 평가는 관찰 자의 주관 및 조명 등 환경적 요인에 의해 객관성이 저하되는 한 계가 있다. 이에 본 연구는 온실의 핵심 연결 부품인 새들 클램 프(Saddle clamp)를 대상으로 적청(Red Rust)의 등급을 정량 적으로 평가하기 위한 영상 처리 기반 자동화 알고리즘을 제안 하였다. 가속 부식 거동 분석을 위해 중성 염수분무시험(NSS test) 24시간에서 120시간까지 수행하여 시편을 획득하였으 며, 일정한 조명 및 촬영 조건 하에서 디지털 영상을 수집하였 다. 배경 노이즈 및 초기 백청(White Rust) 오탐지를 배제하고 자 전처리와 HSV-RGB 복합 필터링을 적용하여 실제 적청 영 역만을 추출하였다. 제안된 알고리즘은 KS D 9502 RN 표준도 와의 검증에서 높은 수치적 일치도를 보여 정량적 평가 도구 로서의 활용 잠재력을 확인하였다. 본 연구 결과는 향후 온실 구조물의 자동화된 부식 모니터링 및 체계적인 유지관리 시스 템 구축을 위한 기초 자료로 활용될 수 있을 것으로 기대된다.
Agricultural greenhouse structures are continuously exposed to high-temperature and high-humidity environments, which accelerates the corrosion of metal fastening components and significantly compromises structural safety. Conventional visual inspection methods for corrosion assessment are limited by their lack of objectivity, as they are susceptible to observer subjectivity as well as environmental factors such as lighting conditions. To address these limitations, this study proposes an automated, image processing-based algorithm for the quantitative evaluation of red rust grades on saddle clamps, which are critical connecting components in greenhouses. To analyze accelerated corrosion behavior, specimens were obtained by conducting neutral salt spray (NSS) tests for durations ranging from 24 to 120 hours, digital images were subsequently acquired under controlled lighting and photographic conditions. To eliminate background noise and prevent the false detection of initial white rust, preprocessing and a combined HSV-RGB filtering technique were applied, enabling the effective extraction of actual red rust areas. Validation against the KS D 9502 Rating Number (RN) standard images demonstrated a high numerical consistency, thereby indicating the potential of the proposed algorithm as a quantitative evaluation tool. The results of this study are expected to serve as foundational data for the development of automated corrosion monitoring and systematic maintenance systems for greenhouse structures in the future.