논문 상세보기

Image-Based Quality Evaluation of Shipping Stage Tomato Seedlings from Commercial Nurseries KCI 등재

공정육묘장 출하단계 토마토 묘의 영상 기반 품질 평가

Gwang Yun Kim, Goun Im, Geonhyoung Kim, Jun Gu Lee
  • 언어ENG
  • URLhttps://db.koreascholar.com/Article/Detail/452894
구독 기관 인증 시 무료 이용이 가능합니다. 4,300원
생물환경조절학회지 (Journal of Bio-Environment Control)
한국생물환경조절학회 (The Korean Society For Bio-Environment Control)
초록

공정육묘장에서 출하되는 묘의 생육 상태는 정식 후 초기 생육과 관련될 수 있으므로, 출하단계 묘를 신속 하고 객관적으로 평가하는 것이 중요하다. 그러나 실제 육묘 현장에서는 묘 평가가 육안 판단에 의존하거나 노동집 약적인 생육 조사를 필요로 하므로, 비파괴적이고 정량적인 평가 방법이 요구된다. 본 연구는 공정육묘장에서 생산 된 출하단계 토마토 묘를 대상으로 영상 기반 초장 및 엽면적 측정의 적용 가능성을 평가하고, 이를 이용한 지상부 생육 및 묘 품질지표의 신속 비파괴 평가 가능성을 검토하고자 수행되었다. 국내 공정육묘장 9곳에서 출하단계 토 마토 묘를 수집하고 Plant Image Measurement System(PIMS)을 이용하여 영상 기반 초장과 엽면적을 측정하였다. 이후 파괴조사를 통해 생육을 조사하고, sturdiness quotient(SQ)와 compactness index(CI)를 산출하였다. 출하단 계 토마토 묘는 육묘장에 따라 지상부 생육에서 다양한 변이를 나타냈다. 영상 기반 초장과 엽면적은 파괴 측정값과 각각 R2 = 0.7524와 0.6837의 양의 선형 관계를 나타냈다. 영상 기반 초장과 엽면적을 이용한 회귀모델의 설명력은 지상부 생체중에서 가장 높았으며(R2 = 0.642), 지상부 건물중은 R2 = 0.509로 나타났다. 반면 SQ와 CI의 설명력은 각각 R2 = 0.407과 0.312로 상대적으로 낮았다. 이러한 결과는 영상 기반 초장과 엽면적이 출하단계 토마토 묘의 형 태적 생육과 지상부 생육을 비파괴적으로 평가하기 위한 기초 지표로 활용될 수 있음을 보여준다. 다만 복합 품질지 표의 평가 정확도를 높이기 위해서는 경경 및 건물 축적 특성을 반영할 수 있는 추가적인 비파괴 형질의 적용이 필 요할 것으로 판단된다.

The growth of seedlings produced from commercial nurseries may be related to early growth after transplanting. Therefore, rapid and objective evaluation of seedlings at the shipping stage is important. However, seedling evaluation in commercial nurseries often depends on visual assessment or requires considerable labor to measure seedling growth, and non-destructive, quantitative evaluation methods are therefore needed. The aim of this study was to evaluate the applicability of image-based measurements of plant height and leaf area in shipping stage of tomato seedlings produced in commercial nurseries and to examine the possibility of rapid and non-destructive evaluation of shoot growth and seedling quality indices using these measurements. Shipping stage tomato seedlings were collected from nine commercial nurseries in Korea, and image-based plant height and leaf area were measured using a Plant Image Measurement System (PIMS). After destructive measurements, seedling growth was evaluated, and the compactness index (CI) and sturdiness quotient (SQ) were calculated. Shipping stage tomato seedlings showed variation among nurseries in 10 growth traits. Image-based plant height and leaf area showed positive linear relationships with the destructive measurements, with R2 values of 0.7524 and 0.6837, respectively. Regression models using image-based plant height and leaf area showed the highest R2 for shoot fresh weight (R2 = 0.642), while the R2 for shoot dry weight was 0.509. In contrast, the R2 values for secondary transformed indices SQ and CI were relatively low at 0.407 and 0.312, respectively. These results indicate that image-based plant height and leaf area can be used for the non-destructive evaluation of morphological characteristics and shoot growth in shipping stage tomato seedlings. However, estimation of CI and SQ related to dry matter accumulation and stem diameter may be needed to improve the evaluation accuracy of seedling quality indices.

키워드
건전도 지수생체량영상 기반 측정충실도 지수Solanum lycopersicum biomasscompactness indeximage-based measurementSolanum lycopersicumsturdiness quotient
목차
Abstract
Introduction
Materials and Methods
    1. Plant materials
    2. Destructive measurement of seedling growth
    3. Image acquisition and image-based growthmeasurements
    4. Calculation of seedling quality indices
    5. Statistical analysis
Results
    1. Growth characteristics of shipping stage tomatoseedlings from commercial nurseries
    2. Linear relationships between destructive andimage-based measurements
    3. Differences in morphological characteristics ofshipping stage tomato seedlings among commercialnurseries
    4. Evaluation of shoot growth and seedling qualityindices using image-based plant height andleaf area
Discussion
    1. Growth variation and the need for qualityevaluation of shipping stage tomato seedlingsfrom commercial nurseries
    2. Applicability of image-based plant height andleaf area measurements
    3. Applicability of image-based plant height andleaf area for the evaluation of shoot fresh weightand dry weight
    4. Limitations of image-based evaluation of CIand SQ
Conclusions
Acknowledgement
Literature Cited
적 요
저자
  • Gwang Yun Kim(Graduate Student, Department of Horticulture, College of Agriculture & Life Sciences, Jeonbuk National University, Jeonju 54896, Korea) | 김광윤 (전북대학교 농업생명과학대학 원예학과 대학원생)
  • Geonhyoung Kim(Graduate Student, Department of Horticulture, College of Agriculture & Life Sciences, Jeonbuk National University, Jeonju 54896, Korea) | 김건형 (전북대학교 농업생명과학대학 원예학과 대학원생)
  • Goun Im(Graduate Student, Department of AI in Agriculture, Graduate School of AI Convergence, Jeonbuk National University, Jeonju 54896, Korea) | 임고운 (전북대학교 AI융합대학원 스마트농업AI융합학과 대학원생)
  • Jun Gu Lee(Professor, Department of Horticulture, College of Agriculture & Life Sciences, Jeonbuk National University, Jeonju 54896, Korea, Professor, Department of AI in Agriculture, Graduate School of AI Convergence, Jeonbuk National University, Jeonju 54896, Korea, Professor, Core Research Institute of Intelligent Robots, Jeonbuk National University, Jeonju 54896, Korea, Professor, Institute of Agricultural Science & Technology, Jeonbuk National University, Jeonju 54896, Korea) | 이준구 (전북대학교 농업생명과학대학 원예학과 교수, 전북대학교 AI융합대학원 스마트농업AI융합학과 교수, 전북대학교 부설 지능형로봇연구소 교수, 전북대학교 농업과학기술연구소 교수) Corresponding author