논문 상세보기

MS LiDAR 인텐시티를 활용한 저재귀반사 차선의 사전 선별 적용성 평가 KCI 등재

Evaluation of MMS LiDAR Intensity for Preliminary Screening of Low-Retroreflectivity Lane Markings

권용규, 김정환
  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/453302
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국도로학회논문집 (International journal of highway engineering)
한국도로학회 (Korean Society of Road Engineers)
초록

This study evaluates the applicability of mobile mapping system (MMS) LiDAR intensity for preliminary screening of low-retroreflectivity lane markings requiring detailed inspection. A field test was conducted over approximately 12 km of an urban expressway in Seoul using a handheld retroreflectometer and Leica TRK500 Evo equipped with a Z+F 9020 LiDAR scanner. The dataset comprised 59 LAS files, 66 retroreflectivity measurements, and 35 physical dashed-line groups, all from the white dashed markings. To account for the uncertainty in the exact handheld measurement locations, spatial analysis ranges of 20%, 30%, 40%, and 50% were evaluated from the corresponding start or end of each dashed marking. The mean LiDAR intensity showed the highest AUC point estimate in the 20% range, whereas performance differences across the ranges of 20–50% were modest. For the primary criterion of RL<100 mcd/(m²·lx), mean intensity achieved a full-data AUC of 0.902 (95% CI: 0.789–0.983), and the mean AUC from 20 repeated 5-fold stratified group cross-validations was 0.851±0.010. An exploratory threshold of approximately 35,350 identified all 17 low-retroreflectivity observations with 100.0% sensitivity and 77.6% specificity, thus reducing the number of observations requiring detailed inspection by 57.6% in this dataset. MMS LiDAR intensity should not be interpreted as a direct substitute for quantitative retroreflectivity measurement but may serve as a practical screening tool for prioritizing detailed inspection in network-level pavement-marking maintenance.

키워드
Mobile mapping systemLiDAR intensityLane markingRetroreflectivityRoad maintenance
목차
ABSTRACT
1. 서론
    1.1. 연구배경 및 목적
2. 연구배경 및 분석방향
    2.1. 노면표시 재귀반사도와 유지관리 기준
    2.2. MMS LiDAR 인텐시티와 재귀반사도의 관계
    2.3. 본 연구의 분석방향 및 차별성
3. 연구방법
    3.1. 시험구간 및 측정장비
    3.2. 핸드헬드 재귀반사도 측정과 LiDAR 대응
    3.3. LiDAR 인텐시티 특성값 산정
    3.4. 공간 분석구간 및 통계분석
4. 분석결과
    4.1. 공간 분석구간에 따른 민감도 분석
    4.2. LiDAR 인텐시티 특성값과 재귀반사도의 관계
    4.3. 저재귀반사 노면표시의 사전 선별 성능
    4.4. 동일 점선 내부의 국부적 재귀반사도 차이
5. 고찰
    5.1. MMS 기반 사전 선별의 적용 가능성
    5.2. 평균 인텐시티와 최대 인텐시티 비율의 해석
    5.3. 공간 대응방법의 의미
    5.4. 연구의 한계
    5.5. 도로 유지관리 적용방안
6. 결론
REFERENCES
저자
  • 권용규(라이카 지오시스템즈 코리아 리얼리티 캡쳐팀 대리) | Kwon Yongkyu
  • 김정환(국립한국교통대학교 사회기반공학전공 부교수) | Kim Jeonghwan Corresponding author