장미 삽목 번식을 위한 저광도 LED 광질 조건의 비교 평가
본 연구는 실내 삽목 시스템에서 저광도 조건(2 mol·m-2·d-1) 에서 LED 광질이 장미 삽목 번식에 미치는 영향을 평가하고자 수행되었다. 스탠다드 장미 ‘Ruby Red’와 스프레이 장미 ‘Red Wing’의 단경 삽수를 대상으로 백색광(W), 적색광(R), 녹색광 (G), 청색광(B), 적·청 혼합광(RB, 7:3) 조건에서 8주간 삽목을 수행하였다. 삽목 반응은 품종과 광질에 따라 차이를 보였다. ‘Ruby Red’품종은 적색광과 녹색광에서 높은 신초 발생률과 발근율을 보였으며, ‘Red Wing’품종은 백색광과 녹색광에서 가장 양호한 삽목효율을 나타냈다. 반면 RB 처리구는 두 품종 모두에서 엽황화가 증가하고 발근율이 가장 낮았다. 본 실험을 통해 2DLI의 낮은 광량 조건에서도 일부 광질 처리에서 발근과 신초 생장이 가능함을 확인하여, 저광 조건을 활용한 실내 장미 삽목의 적용 가능성을 제시하였다. 이러한 결과는 LED 광질에 대한 장미 품종별 반응 차이를 보여주며, 효율적인 실내 삽목을 위해 광질과 광주기의 최적화가 중요함을 시사한다.
This study evaluated the effects of LED spectral quality on rose cutting propagation under low-light conditions (2 mol·m-2·d-1) in an indoor propagation system. Single-node cuttings of the standard rose ‘Ruby Red’ and the spray rose ‘Red Wing’ were propagated for 8 weeks under white (W), red (R), green (G), blue (B), and red + blue mixed light (RB, 7:3). Propagation responses varied with cultivar and light quality. R and G promoted shoot emergence and rooting in ‘Ruby Red’, whereas W and G were most effective in ‘Red Wing’. In contrast, RB resulted in increased chlorosis and the lowest rooting rates in both cultivars. Successful rooting and shoot development were observed under several LED treatments even at a low DLI of 2 mol·m-2·d-1, suggesting the potential use of low-light conditions for indoor rose cutting propagation. These findings highlight cultivar-specific responses to LED spectral quality and the need to optimize light quality and photoperiod for indoor propagation.