논문 상세보기

유한요소 해석을 활용한 T-Stub 인장 접합부 내 FRP 하이브리드 볼트의 인장⋅파손거동 분석 KCI 등재

Analysis of Tensile Behavior and Failure Modes of FRP Hybrid Bolts Applied to T-Stub Tension Connections

김용민, 허종완
  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/453538
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
복합신소재구조학회 논문집 (Journal of the Korean Society for Advanced Composite Structures)
한국복합신소재구조학회 (Korean Society for Advanced Composite Structures)
초록

다양한 산업 및 환경에 사용되는 강재 볼트는 부식으로 인해 유효단면적과 구조성능이 저하되고 생애주기 감소로 인한 유지 관리 비용이 증가할 수 있다. 이에 본 연구에서는 기존 강재 볼트의 대체재로 FRP 기반 하이브리드 볼트를 검토하였다. 유한요소해석 을 통해 T-Stub 인장 접합부에 적용된 볼트의 응력 거동과 섬유 손상, 파손 거동 및 질량 대비 강도를 비교 분석하였다. 해석결과 질량 대비 강도의 경우 CFRP 볼트가 가장 우수하였으며, 종합적인 성능의 경우 CFRP와 강재가 동시에 적용된 하이브리드 볼트가 가장 우수하였다. 또한, 재료 조합에 따라 두부 파괴, 나사산 전단 파괴 및 강재 단면의 연성 파괴가 나타났다. 이러한 복합적인 성능을 고려하여 추가적인 최적화 및 적용성 검토가 이루어지면 각종 구조물에서 경량화 체결부품으로의 높은 활용 가능성이 있을 것으로 기대된다.

Steel bolts are used in various industries and environments; consequently, they are susceptible to corrosion. This corrosion can reduce their effective cross-sectional area, structural performance, and service life while increasing maintenance and life-cycle costs. To meet the need for lightweight, corrosion-resistant fastening components, this study investigates the applicability of fiber-reinforced polymer (FRP)–based hybrid bolts as suitable alternatives to conventional steel bolts. Finite element analyses were performed using ABAQUS to evaluate the stress–strain behavior, Hashin fiber damage, failure modes, and strength-to-mass ratio performance of bolts installed in tensile-loaded T-stub connections. The results showed that the carbon-fiber-reinforced polymer (CFRP)–steel hybrid bolt exhibited the highest tensile performance, whereas the CFRP bolt achieved the highest strength-to-mass ratio. Depending on the material combination, distinct failure modes, including bolt-head fracture, shear/pull-out failure, and ductile failure of the metallic core, were observed. These findings demonstrate the potential of FRP-based hybrid bolts as lightweight fastening components for various structures.

키워드
FRP 볼트하이브리드 볼트T-Stub 접합부볼트 파단부식 저항 패스너 FRP boltshybrid boltsT-stub tensionbolt failurecorrosion resistant fastener
목차
ABSTRACT
1. 서 론
2. 본 론
    2.1 인장 접합부의 파괴 형태
    2.2 수치해석 모델 구성
3. 해석결과 및 고찰
    3.1 모델별 인장강도 및 구조성능
    3.2 플랜지 프라잉 작용에 따른 케이스별 파손모드
    3.3 재료 조합에 따른 파손모드 분석
4. 결 론
ACKNOWLEDGMENT
REFERENCES
국문초록
저자
  • 김용민(인천대학교 건설환경공학과 석사과정) | Kim Yongmin (Graduate Student, Department of Civil and Environmental Engineering, Incheon National University, Incheon, Korea)
  • 허종완(인천대학교 건설환경공학과 교수) | Hu Jongwan (Professor, Department of Civil and Environmental Engineering, Incheon National University, Incheon, Korea) Corresponding author