Design and Structural Stability Evaluation of a Precision Watering Seeder with Hall Sensor-Based Synchronization Control Mechanism
This study presents the design and structural stability evaluation of a precision watering seeder that supplies a metered amount of water to the seed hole immediately after seeding. The proposed system detects the rotational position of the seeding drum using a Hall sensor and neodymium magnets, and an Arduino Mega controls the opening time of a solenoidvalve through a MOSFET module. The main design feature is the 628.32 mm valve position reference, which is three times the 209.44 mm seeding interval of a six-spike drum. This integer-multiple arrangement synchronizes the watering point with the previously formed seed hole. Static structural analysis using ANSYS showed a representative probe stress of 47.934 MPa and a safety factor of 4.28, while ADAMS flexible-body dynamic analysis showed a maximum hot-spot stress of 81.31 MPa and a safety factor of 2.53. Watering tests demonstrated that the proposed system delivered approximately 20 mL under representative operating conditions, confirming the basic functional feasibility of the watering module.