Effects of operational data integration and variable selection on machine learning-based state classification of rotating equipment in a wastewater treatment plant
공공하수처리시설의 노후화로 회전설비의 예지보전 필요성이 증가하고 있으나, 설비 상태 진단에서 공정 운전 자료의 활용 효과는 충분히 검토되지 않았다. 본 연구는 실규모 하수처리시설의 원심농축기와 호기조 송풍기를 대상으로 운전 데이터 통합과 입력 변수 구성에 따른 머신러닝 기반 상태 분류 성능을 평가하였다. 설비 상태는 ISO 10816-1의 진동 속도 실효값(root mean square, RMS) 기준으로 구분하였다. 센서 변수만 사용한 조건(A), 운전일지의 전체 변수를 추가한 조건(B), 상관 분석⋅계층적 군집화⋅현장 자문으로 선별한 변수를 추가한 조건(C), C에서 일부 수질 분석 변수를 제외한 조건(D)을 비교하였다. 재표본추출은 학습 자료에만 적용하였다. 센서 자료 중 온도만 사용한 실험에서 B의 랜덤포레스트(random forest, RF) 다중 분류 accuracy와 macro F1-score는 A에 비해 농축기에서 각각 0.76과 0.48에서 0.90과 0.62로, 송풍기에서 0.72와 0.67에서 0.86과 0.82로 향상되었다. RF의 성능은 두 설비 모두 B, C, D, A 순이었다. 전체 센서 변수와 주성분분석(principal component analysis, PCA)을 사용한 실험에서는 높은 분류 성능을 보였으나, 운전 변수의 추가 효과는 설비별로 달랐다. 다만 이 조건은 상태 등급 산정에 사용한 진동 정보를 입력에도 포함하므로 PCA만의 효과로 해석할 수 없다. 본 결과는 공정 운전 자료를 통합하고 설비별로 적합한 입력 변수 구성을 검토할 필요성을 시사한다. 다만 본 연구의 상태 등급은 진동 기준에서 도출되었고 자료 분할이 동일 기간 내에서 이루어졌으므로, 제시된 성능은 동일 기간 내 상태 구분 가능성을 나타내는 상한으로 해석해야 한다.
Aging wastewater treatment infrastructure increases the need for predictive maintenance, yet the contribution of process operating data to equipment diagnosis remains insufficiently examined. This study evaluated operational data integration and input variable selection for machine learning-based state classification of a centrifugal thickener and an aeration blower at a full-scale wastewater treatment plant. States were assigned using ISO 10816-1 vibration velocity root mean square thresholds. Four input sets included sensor variables alone (A), A with all operational variables (B), A with selected operational variables (C), and C excluding selected water quality parameters (D). Resampling was restricted to training data. In the temperature-only sensor experiment, adding all operational variables improved multiclass random forest accuracy and macro F1-score from 0.76 and 0.48 to 0.90 and 0.62 for the thickener, and from 0.72 and 0.67 to 0.86 and 0.82 for the blower. Selected sets underperformed the complete set. Including all sensor variables with principal component analysis yielded high performance, but the inclusion of label-defining vibration information prevents attributing this improvement solely to dimensionality reduction. These findings support operational data integration and equipment-specific input selection for state classification. The reported performance should be interpreted as an upper bound for state discrimination within that period because the state grades were derived from vibration thresholds and the data were split within a single period.