논문 상세보기

전산유체해석을 이용한 소형 풍력발전기 블레이드 성능 특성 비교에 관한 연구 KCI 등재

Comparative Study on the Performance Characteristics of Small Wind Turbine Blades Using Computational Fluid Dynamics

정남균
  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/453905
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국기계항공기술학회지(구 한국기계기술학회지) (Journal of the Korean Society of Mechanical and Aviation Technology)
한국기계항공기술학회(구 한국기계기술학회) (Korean Society of Mechanical Technology)
초록

This study compared the flow and performance characteristics of small drag-type and lift-type vertical-axis wind turbines using computational fluid dynamics. ANSYS CFX was used to evaluate the mean torque and mechanical power at inlet wind speeds of 4, 8, and 12 m/s over a range of rotational speeds. Flow fields at different rotor angles and temporal variations in torque were also analyzed. The results showed that the drag-type turbine developed an extensive low-velocity wake downstream of the blades, and its torque decreased as rotational speed increased. In contrast, at a wind speed of 12 m/s, the torque and power of the lift-type turbine increased with rotational speed, resulting in higher power than the drag-type turbine at the investigated speeds of 300 rpm and above. At wind speeds of 4 and 8 m/s, the drag-type turbine produced greater torque and power within the rotational speed ranges examined. However, the observed torque trends suggest that the lift-type turbine may produce greater torque than the drag-type turbine at higher rotational speeds. These findings indicate that both inlet wind speed and operating rotational speed should be considered when selecting a small wind turbine type.

키워드
소형 풍력터빈수직축 풍력터빈항력형양력형전산유체해석 Small wind turbineVertical-axis wind turbineDrag typeLift typeComputational fluid dynamics
목차
Abstract
1. 서 론
2. 수치해석 방법 및 결과
    2.1 해석 대상 및 계산영역
    2.2 수치해석 방법 및 토크의 시간 변화
    2.3 회전각도별 유동장 및 성능 비교
3. 결 론
후 기
References
저자
  • 정남균(Professor, Dept. of Mechanical Engineering, Inha Technical College) | Namgyun Jeong Corresponding author