A Study on 3D Precision Measurement and Calibration Technology of Vehicle Body Structures Based on Laser Centering for Autonomous Driving Sensor Zero-Point Restoration
As advanced driver assistance systems (ADAS) become increasingly sophisticated, accurate restoration of vehicle body structures is important for maintaining the mounting positions of onboard sensors after a collision. In particular, deformation of the front side member may affect the geometric alignment of sensors installed on the vehicle body. This study proposes a laser centering gauge for measuring and correcting three-dimensional structural displacement during vehicle body repair. The proposed system uses a vehicle body reference line and reference plane to evaluate lateral (Y-axis) and vertical (Z-axis) displacement. Experimental evaluations were conducted on four representative vehicles, and the measurement results were compared with those obtained using conventional manual measurement methods and manufacturer reference dimensions. The study examines the applicability of the proposed system to precision body repair and its potential to provide a more reliable geometric basis for subsequent ADAS sensor calibration. The measurement accuracy and the effectiveness of sensor calibration should be evaluated separately according to the experimental conditions and vehicle-specific repair specifications.