간행물

대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science

권호리스트/논문검색
이 간행물 논문 검색

권호

제15권 제4호 (2013년 12월) 50

연구논문

21.
2013.12 구독 인증기관 무료, 개인회원 유료
Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers’ manual data input are expected to be solved; safety can also be improved by enhancing workers’ attention to work by minimizing workers’ injuries and disruption.
4,000원
22.
2013.12 구독 인증기관 무료, 개인회원 유료
An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra9.94 ㎛ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.
4,000원
23.
2013.12 구독 인증기관 무료, 개인회원 유료
Polyurethane is an elastomer polymer, which is flexible, tough and resistant. This material is widely used various fields such as automobile, aeroplane, textiles, construction industries. Currently there exists more than 1,000 manufacturing companies in Korea that are closely related to Polyurethane. In spite of a number of Polyurethane manufacturing companies, there are little attention in academia as well as industries to study the safety and manufacturing process improvement on Polyurethane. In this paper, we consider a case study for the Polyurethane manufacturer to improve productivity by using safety management and manufacturing process reengineering. After careful analysis, we derive three enhancements to increasing the safety and productivity for the target company. Especially, we achieve about 16% productivity improvement in roller manufacturing process by replacing manual stirring job with automated mixing machine.
4,300원
24.
2013.12 구독 인증기관 무료, 개인회원 유료
OSHA(Occupational Safety and Health Act) generally regulates employer’s business principles in the workplace to maintain safety environment. This act has the fundamental purpose to protect employee’s safety and health in the workplace by reducing industrial accidents. Authors tried to investigate the correlation between ‘occupational injuries and illnesses’ and level of regulation compliance using Survey on Current Status of Occupational Safety & Health data by the various statistical methods, such as generalized regression analysis, logistic regression analysis and poison regression analysis in order to compare the results of those methods. The results have shown that the significant affecting compliance factors were different among those statistical methods. This means that specific interpretation should be considered based on each statistical method. In the future, relevant statistical technique will be developed considering the distribution type of occupational injuries
4,200원
25.
2013.12 구독 인증기관 무료, 개인회원 유료
By means of the model competition, this research analyzed the factor of patient management, the factor of policy support, and the factor of medical treatment system. Concretely, the factor of policy support forms a positive effects on the factor of medical treatment system. Practically, well-established healthcare policy provide and facilitate the effective medical treatment system. of the hospital. And, in the effective medical treatment system, hospitals try to develop the patient management of the chronic disease. From the empirical research, this paper concluded that the factor of medical treatment system. mediated by the factor of policy support. Also, the factor of medical treatment system promotes the development of patient management in the chronic disease.
4,000원
26.
2013.12 구독 인증기관 무료, 개인회원 유료
This paper reviewed the relationship among safety-specific transformational leadership, safety motivation, and safety participation, and the mediating effect of safety motivation between transformational leadership and safety participation. Based on the responses from 233 employees, the results of multiple regression analysis appeared as follow; 1) charisma, individual consideration, intellectual stimulation, and inspiration effect positively on safety motivation. 2) safety motivation effects positively on safety participation. 3) safety motivation mediates fully between charisma/inspirationand safety participation. 4) safety motivation mediates partly between individual consideration/intellectual stimulation and safety participation.
4,000원
27.
2013.12 구독 인증기관 무료, 개인회원 유료
Recently SARS and bird flu has been infected widely in the world; we have to care about germs and virus in indoor air environment. Especially that transmission by means of transportation is a major infection route. In this study, a private car simulated with CFD for prediction of indoor airborne microbe transport. Simulation performed with real situation in car, four occupants with a infected driver and four stage air ventilation controled by HVAC system. Result show that CFD can be visualized microbe transport other occupants and who is more exposed to airborne microbe. also it make a prediction of microbe transport in car.
4,000원

응용논문

28.
2013.12 구독 인증기관 무료, 개인회원 유료
As companies were concerned with developing green logistics and environment, most logistics concerned functions like packaging, loading, storage, transportation and IT studies are active in study. Even if active in research studies, companies still recognized that logistics cost increases as green concepts are applied. For the efficient execution of green logistics management, it is absolutely necessary but difficult to build an optimal logistics system where each function is smoothly interacted through the proper integration and the link of various logistics functions and partners. This study aims to development of green logistics through integration of supply chain functions and partners. With this aim of study, case studies with analysis of embodiment, planning and operations for supply chain of companies are carried out.
4,200원
29.
2013.12 구독 인증기관 무료, 개인회원 유료
In this paper, the expert system to reduce the amount of food waste is proposed. The method of material flow analysis (MFA) is applied. Proper handling of waste beyond the terms of the need for proactive research been mentioned before, but actually cause the waste generator research focuses on consumer behavior and the business community to analyze the flow of materials within the study are insufficient . In this paper, the type of food consumption and food waste, look at the relationship between the occurrence of secondary schools in the diet is provided for students to examine the preferences of the target model diet expert system was reconfigured . Preference for leaving the food in the diet leads to the important information that is Each diet recipes that make up the target material flow analysis (MFA) was constructed to perform all the database . This database is currently being generated from the rain while cooking diet edible plants and materials to reflect the self-esteem following the recommended diet is used to create . Reducing food waste is actually being used currently in research knowledge to the knowledge base was constructed . Future Home Smart System was developed in conjunction with the system to the user , by providing guidelines for the utilization can be expected.
4,000원
30.
2013.12 구독 인증기관 무료, 개인회원 유료
The importance of environmental protection has been increased recently. Thus the environmental management was settled in an important global competition factor. In the meantime logistics cost occupied the 8.03% of sales at 2011. This portion was greater than the portion of other countries and it was needed the reduction of logistics cost to secure the competition power. As thus in this paper we prepared the process which diminish the environmental discharge and decrease the logistics cost. We proposed the process to apply the MFCA to SCM, until now the MFCA had been used generally in manufacturing process. We defined the loss in SCM and the plus logistic, minus logistic, logistic center and the classification of cost to adopt the MFCA to SCM.
4,000원
31.
2013.12 구독 인증기관 무료, 개인회원 유료
In automobile company it is needed to establish the collaborative relationship between the assembly company and the part manufacturing company. In this paper we established the improvement for the procurement logistics and logistics in assembly company and thus we derived the near optimal procurement cycle through the simple EXCEL simulation and the improved inventory management method for H automobile company in CHINA. At this time we adopted the pull manufacturing process instead of push manufacturing process. We resulted that the manufacturing activity of both companies was stabilized and the usage of storage area in assembly company was reduced by 50%, especially it was reduced by 100% in the case of directly delivering the parts to assembly line through the third party logistics company.
4,000원
32.
2013.12 구독 인증기관 무료, 개인회원 유료
Recently, fundamental manufacturing industry such as casting foundry, plasticity, welding etc. is rise to concerned. This study is the analysis of using structural equation method in order to verify the significant activation factor of quality management activities and the effect on business performance in fundamental manufacturing industry. To perform this research, we surveyed CEOs, managers, workers working for manufacturing business. We analysed valid 357 questionnaires that we could use for this research using SPSS 15.0 and AMOS 18.0. The results through this research is following. First, we verified the relationship between organizational supports and employee’s participation to quality management activity, we could get the result that positive influence on to interrelation. Second, we analysed that organizational supports had a meaningful effect on not process performance but business performance. Third, we found that employee’s participation to quality management activity had a significant to business performance, and process performance had a meaningful effect to business performance.
4,000원
33.
2013.12 구독 인증기관 무료, 개인회원 유료
The purpose of this study is to present a case study of six sigma quality improvement practice in cooling fan motor(CFM) manufacturing processes. In this study, the CFM manufacturing process of automobile parts not relevant to the target process rate of the process point of view, in order to reduce the system to solve the problem of localized resolution procedures of six sigma DMAIC methodology was applied to study. In conclusion , this study 's field D in order to improve the initial rate of inadequate quality management best practices by applying the method of Six Sigma quality CFM failure through stabilization schemes were proposed cost reduction .To be CFM product to satisfy customers based on continuous monitoring of the effective field of claims quality management system is required.
4,000원
34.
2013.12 구독 인증기관 무료, 개인회원 유료
Due to sudden transition to intellectual society corresponding with fast technology progress, companies and nations need to focus on development and guarantee of intellectual property. The possession of intellectual property has been the important factor of competition power. In this paper we developed the efficient patent search process with big data analysis tool R. This patent search process consists of 5 steps. We result that at first this process obtain the core patent search key words and search the target patents through search formula using the combination of above patent search key words.
4,000원
35.
2013.12 구독 인증기관 무료, 개인회원 유료
In order to investigate of technology competitiveness for domestic engineering enterprise, using the quantitative and objective patent. In these result, the technology competitiveness(Patent Activity Index, Patent Family Size Index, Patent Impact Index, Technology strength) of our enterprise is far inferior to another country. So we should try to achieve our superiority in competitive power, we devote ourself to put through technical improvements of our domestic engineering enterprise in many ways.
4,800원
36.
2013.12 구독 인증기관 무료, 개인회원 유료
본 논문에서는 주성분 회귀법과 부분최소자승 회귀법을 비교하여 보여준다. 이 비교의 목적은 선형형태를 보유한 근적외선 분광 데이터의 분석에 사용할 수 있는 적합한 예측 방법을 찾기 위해서이다. 두 가지 데이터 마이닝 방법 론인 주성분 회귀법과 부분최소자승 회귀법이 비교되어 질 것이다. 본 논문에서는 부분최소자승 회귀법은 주성분 회귀법과 비교했을 때 약간 나은 예측능력을 가진 결과를 보여준다. 주성분 회귀법에서 50개의 주성분이 모델을 생 성하기 위해서 사용지만 부분최소자승 회귀법에서는 12개의 잠재요소가 사용되었다. 평균제곱오차가 예측능력을 측 정하는 도구로 사용되었다. 본 논문의 근적외선 분광데이터 분석에 따르면 부분최소자승회귀법이 선형경향을 가진 데이터의 예측에 가장 적합한 모델로 판명되었다.
4,000원
37.
2013.12 구독 인증기관 무료, 개인회원 유료
Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system were being actively developed. In this paper, the distortion in the 7-inch LCD screen for the treatment process are divided into Online and Offline processing. Offline processing based on the image signal processing and for generating LUT Online to Offline generated by processing the distortion is applied to the LUT. LUT is applied to distort the image processing in real time, so that distortion correction is made for the purpose of setting.
4,000원
38.
2013.12 구독 인증기관 무료, 개인회원 유료
The number of domestic smartphone users exceeded 30 million people, and the time in the future everyone will use a smartphone that will come with ago. Past purchase decisions, related research and product from the competition between the past case and the relevant literature for the smartphone market smartphone type to derive a purchase decision factors in the decision to purchase any difference between the factors. Literature and practices through performance, switching costs, product loyalty, design, brand, after-sales service, the price more than 7 variables were analyzed. One hundred people surveyed, respectively, did not obtain the response of a variety of ages and occupations , age of the sample used in the analysis of this study, and is concentrated as a student at the university of smartphones used to facilitate users analysis was done. We expect smartphone companies and related companies to be able to give guidelines for effective technology management.
4,000원
39.
2013.12 구독 인증기관 무료, 개인회원 유료
This research examines the causal relationships between supervisor trust and organizational citizenship behavior(OCB) and the mediating role of organizational trust on OCB. Using the sample of 282 small and medium sized enterprises’ employees, this study analyzes three alternative hypotheses centered around supervisor trust, organizational trust, and OCB. The results show that supervisor trust has a strong positive effect on OCB. Second, organizational trust is positively related to OCB. Third, this research proves that partial mediating effects of organizational trust exist between supervisor trust(relational trust) and OCB(civic virtue, sportsmanship). Finally, this research proves that a full mediating effect of organizational trust exists between supervisor trust(calculative trust) and OCB(sportsmanship). This study recommends supervisor trust, organizational trust be valued in order to increase OCB vital for organizational effectiveness or productivity in small-medium sized manufacturing enterprises.
4,600원
40.
2013.12 구독 인증기관 무료, 개인회원 유료
The purpose of this study includes: the relationships between corporate entrepreneurship(innovation, proactiveness, risk-taking) and firm performance(non-financial performance, financial performance) and the mediating effect of the self-efficacy on the relationship between corporate entrepreneurship and firm performance. In order to verify the relationships and mediating effect, data were collected from 368 individuals in employees working in small and medium-sized firms at Gyeongnam region to test theoretical model and its hypotheses. All data collected from the survey were analyzed using with SPSS 18.0. This study reports findings as follows: first, the relationship between the corporate entrepreneurship(except innovation) and the employee's self-efficacy is positively related. Second, there was also a positive correlation between the employee's self-efficacy and firm performance. Third, the relationship between the corporate entrepreneurship and the non-financial performance is positively related. The relationship between the corporate entrepreneurship(except innovation) and the financial performance is positively related. Finally, the employee's self-efficacy played as a partial mediator on the relationship between risk-taking and firm performance. The employee's self-efficacy played as a fully mediator on the relationship between proactiveness and non-financial performance. The employee's self-efficacy played as a partial mediator on the relationship between proactiveness and financial performance. However, there was no empirical evidence for the mediating effect of employee's self-efficacy on the relationship innovation and firm performance. Based on these findings, the implications and the limitations of the study were presented including some directions for future studies.
4,300원
1 2 3