간행물

대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science

권호리스트/논문검색
이 간행물 논문 검색

권호

제16권 제4호 (2014년 12월) 48

21.
2014.12 구독 인증기관 무료, 개인회원 유료
Crimes with explosives is one of the mass-destructive crimes that involves the most victims. It is heavily punished under the Korean laws. Mid-eastern area is one of the leading places that are home to improvised explosive device attacks, in the form of religious or political terrorism because of its convenience of use, production and disguise. Improvised bombs are permeating into domestic crimes in Korea as their tools. Use of explosive substances are strictly restricted in this country, but it is not impossible to find its information online and to create private explosives with a bit of interest. And they are being traded in the grey market. For this reason, this thesis offers the method of an efficient safety control of explosive substances, which can be used as raw materials for improvised explosive devices, in order to protect citizens’lives and properties and to promote national security down the road.
4,000원
22.
2014.12 구독 인증기관 무료, 개인회원 유료
Sickness absence is one of the most important indicators for worker's health and occupational safety and health performance. Sickness absence is primarily depended upon sickness but psycho-social factors in workplace may moderate sickness absence. Even though worker is falling into illness, sickness absence can be prevented by job satisfaction. In Korea it is very difficult to find research output about the association of sickness absence with job satisfaction. This study is planned to investigate the effect of job satisfaction on sickness absence. The third Korean Working Conditions Survey done by Occupational Safety and Health Research Institute in 2011 was used to analyze by logistic regression analysis. The result has shown that job satisfaction has statistically significant effect on sickness absence and simultaneously diminish the effect of symptoms experience on sickness absence. The effect of job satisfaction is greater in short term sickness absence than in long term sickness absence. This study has some limitation because of the cross sectional data of Korean Working Conditions Survey. In future, sophisticated statistical analysis may be done with modelling.
4,200원
23.
2014.12 구독 인증기관 무료, 개인회원 유료
This paper is to investigate the employees' corresponding types and casual analysis. It proposes the legal and practical measures for improvement of Industrial Accident Compensation Insurance's usability. The results from the empirical analysis indicate that (1) 91.4 percent of the respondents feel the necessity of Industrial Accident Compensation Insurance, (2) 67.4 percent of the respondents perceive that Industrial Accident Compensation Insurance is useful, (3) employers’ perceptions of the specific items of Industrial Accident Compensation Insurance appears to be low. (4) 35.9 percent of the respondents deal with industrial accidents through other ways such as health insurance and car insurance. The study ends with discussion of the findings and provides several theoretical and managerial implications and recommendations for future research and applications.
4,500원
24.
2014.12 구독 인증기관 무료, 개인회원 유료
Failure modes and effects analysis (FMEA) is a widely used engineering tool in the fields of the design of a product or a process to improve its quality or performance by prioritizing potential failure modes in terms of three risk factors―severity, occurrence, and detection. In a classical FMEA, the risk priority number is obtained by multiplying the three values in 10 score scales which are evaluated for the three risk factors. However, the drawbacks of the classical FMEA have been mentioned by many previous researchers. As a way to overcome these difficulties, this paper suggests the ELECTRE III that is a representative technique among outranking models. Furthermore, fuzzy linguistic variables are included to deal with ambiguous and imperfect evaluation process. In addition, when the importances for the three risk factors are obtained, the entropy method is applied. The numerical example which was previously studied by Kutlu and Ekmek‡ioğlu(2012), who suggested the fuzzy TOPSIS method along with fuzzy AHP, is also adopted so as to be compared with the results of their research. Finally, after comparing the results of this study with that of Kutlu and Ekmek‡ioğlu(2012), further possible researches are mentioned.
4,000원
25.
2014.12 구독 인증기관 무료, 개인회원 유료
The purpose of this study is to identify the overall occupational safety and health status and the characteristics of the workers engaged in the field of the film and television artists, and to take appropriate measures to prevent industrial accidents, profession and working environment, safety recognition and education, safety activities, accident experience, and job stress survey. Survey using a structured questionnaire is to be used for 302 worker directly interview research. Safety awareness level of himself or herself was "middle level" of 3.1 points. Those of colleagues and the general public were evaluated to be low as 2.8 points and 2.5 points, respectively. During the last 12 months, 4.6% of total workers have received an industrial safety health education for work-related accident or disease. Regarding cases of having experienced work-related accident or having been exposed to work-related disease over the past 1 year, 20.2% of total respondents have experienced accident. 16.2% of total respondents have experienced work-related disease. And the workers are approximately one's own subjective feeling of physical symptoms that have appeared. In addition, the film sector workers in particular occupations men than women have higher job stress. Preventive education for industrial safety is required to be expanded and strengthened. Safety education is urgently required in order to prevent, and to reduce accident. Safety and health guideline is required to be developed and disseminated in order to prevent accident in advance. Finally, the actor and their staff members to reduce the stress, mental health care and education carefully needs to be in parallel. Also, when taking measures to reinforce safe work environment, it needs to be protected.
4,000원
26.
2014.12 구독 인증기관 무료, 개인회원 유료
Safety management is becoming one of the most hot research issues in Korea. We collected the researcher information in two safety related journals of the journal of the Korea safety management & science and the journal of Korean society of safety. Social network analysis was used to analyse the research relationship among the authors in each journal. The degree centrality, the betweenness centrality, the closeness centrality and the proximity prestige centrality on each researcher were calculated to find out most influenced researcher. Biggest research groups in each journal were introduced by clustering technique.
4,000원
27.
2014.12 구독 인증기관 무료, 개인회원 유료
Risk information may be one of the most important factor for worker's safe behavior because that safe behavior can be oriented by attitude based on risk information. Traditionally KAP(knowledge, attitude and practice) model was useful frame for the change of human behavior. Knowledge is formed by information through experience and education. Worker's health may be prevented by his or her own active safe behavior based on risk information. This paper is to investigate the effect of labor union on the provirion of risk information by labor union. Data for analysis is the third Korean Working Conditions Survey done by Occupational Safety and Health Research Institute in 2011. The sample size is 50,032 economic active person surveyed by household interview survey with structure questionnaire by trained interviewer. The difference of risk information provision among employees was tested by mean difference test. The level of risk information of employees of companies with labor union is higher than that with non labour union. This paper has some implication for the promotion of safe behavior of employees through risk information provision mediated by labor union. Some limitation of this study may be considered because of using the cross sectional survey data.
4,000원
28.
2014.12 구독 인증기관 무료, 개인회원 유료
The present study is aimed at examining in multilateral ways the structural relationship among technological orientation, market orientation and product development performance of manufacturing companies, which are deemed to be key factors for them to increase absorptive capacities. From the study, it was revealed that: First, in terms of the relationship between market orientation and absorptive capacities, it was made clear by the analysis that the market orientation sought after by manufacturing companies has influence upon their absorptive capacities. Second, with regard to the relationship between technological orientation and absorptive capacities of manufacturing companies, the analysis found that the technological orientation pursued by them affects their absorptive capacities. Third, as for the relationship between absorptive capacities and product development performance, the analysis made it clear that the absorptive capacities of manufacturing companies exerts influence upon their product development performance. Fourth, in respect to the relationship between market orientation and product development performance, it was concluded from the analysis that market orientation produces effect upon product development performances like technological innovation and acquisition of new technologies needed for product development. Finally, regarding the relationship between technological orientation and product development performance of manufacturing companies, it became obvious from the analysis that the technological orientation affects the product development performance.
4,300원
29.
2014.12 구독 인증기관 무료, 개인회원 유료
Decision Tree is one of analysis techniques which conducts grouping and prediction into several sub-groups from interested groups. Researcher can easily understand this progress and explain than other techniques. Because Decision Tree is easy technique to see results. This paper uses CART algorithm which is one of data mining technique. It used 273 variables and 70094 data(2010-2011) of working environment survey conducted by Korea Occupational Safety and Health Agency(KOSHA). And then refines this data, uses final 12 variables and 35447 data. To find satisfaction factor in working environment, this page has grouped employee to 3 types (under 30 age, 30 ~ 49age, over 50 age) and analyzed factor. Using CART algorithm, finds the best grouping variables in 155 data. It appeared that ‘comfortable in organization’ and ‘proper reward’ is the best grouping factor.
4,000원
30.
2014.12 구독 인증기관 무료, 개인회원 유료
The paper examines how ethical leadership and organizational identification contributed to explaining organizational commitment. In order to verify the relationships and mediating effect, data were collected from 256 individuals in employees working in small and medium-sized firms at Jinju, Changwon, Gimhae City to test theoretical model and its hypotheses. All data collected from the survey were analyzed using with SPSS 18.0. This study reports findings as follows: first, the relationship between the ethical leadership and the organizational identification is positively related. Second, there was also a positive correlation between the organizational identification and the organizational commitment. Third, the relationship between the ethical leadership and the organizational commitment is positively related. Finally, the organizational identification played as a partial mediator on the relationship between ethical leadership and organizational commitment. Based on these findings, the implications and the limitations of the study were presented including some directions for future studies.
4,000원
31.
2014.12 구독 인증기관 무료, 개인회원 유료
In this paper, due to the instability of the domestic market, global competition is intensifying in the current situation of global capacity building of SMEs for the purpose of developing a diagnostic indicator placed on the purpose. In this model, the results of applying several companies overall global innovation pilot enterprises and non-rated global innovative companies awarded significant difference between the score and the ability to believe the show. Non-global innovation companies, the relative firm size factor and R&D investment and patent number of factors are lacking appeared shone This is a common small business nature of the majority of companies small and R&D investment, the absolute amount is insufficient to reflect that, but the global innovator in the case of firm size and the relatively large amount of investment that never shows.
4,000원
32.
2014.12 구독 인증기관 무료, 개인회원 유료
Recently, though it was developed several services using the context-awareness technology of IoT, there exist also obstacles for high quality service. Specifically it is short the study for uncertainty of context-awareness. This study focused on understanding the effect of frequency interference among several environmental factors for location determination to increase precision of location determination. It was found that frequency interference between devices using 2.4Ghz frequency effect on the location determination precision. It was resulted that frequency interference increase the error of location determination precision. Then, we confirmed that it was required the suitable compensation method corresponding to frequency interference.
4,000원
33.
2014.12 구독 인증기관 무료, 개인회원 유료
본 연구는 공급자(supplier)가 중간 유통자(wholesaler/retailer)의 수요 증대를 목적으로 중간 유통자의 주문량에 따라 차별적으로 외상 기간을 허용한다는 기본적인 가정 하에 중간 유통자의 재고 모형을 다루었다. 문제 분석을 위하여 최종 고객(customer)의 수요는 중간 유통자의 재고 수준에 따라 선형적(linearly)으로 증가한다는 가정하에 모형을 분석하였고, 모형 분석을 통하여 중간 유통자의 이익을 최대화하는 경제적 주문주기와 경제적 주문량 결정 방법을 제시하고, 예제를 통하여 그 제시된 해법의 타당성을 보였다.
4,000원
34.
2014.12 구독 인증기관 무료, 개인회원 유료
Various inventory control theories have tried to modelling and analyzing supply chains by using quantitative methods and characterization of optimal control policies. However, despite of various efforts in this research filed, the existing models cannot afford to be applied to the realistic problems. The most unrealistic assumption for these models is customer demand. Most of previous researches assume that the customer demand is stationary with a known distribution, whereas, in reality, the customer demand is not known a priori and changes over time. In this paper, we propose a reinforcement learning based adaptive echelon base-stock inventory control policy for a multi-stage, serial supply chain with non-stationary customer demand under the service level constraint. Using various simulation experiments, we prove that the proposed inventory control policy can meet the target service level quite well under various experimental environments.
4,000원
35.
2014.12 구독 인증기관 무료, 개인회원 유료
Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.
4,200원
36.
2014.12 구독 인증기관 무료, 개인회원 유료
Many systems using RFID/USN were and are being developed. Some systems are used in practice and some are not. Generally, the main reasons not being used are: The prices of chips are too high considering the effects. The application domain is not appropriate for RFID/USN. So, various skills for higher sensing precision have been introduced like using multiple sensors and avoiding metals which deter sensings seriously. Now, it is time to evaluate systems which were developed using RFID/USN technology. However, no systematic approach has been made for the evaluation. In this paper, a framework using BSC is introduced for the evaluation of systems using RFID/USN. In this framework, some Critical Success Factors(CSF) are derived and some Key Performance Indices(KPI) are developed for each CSF.
4,000원
37.
2014.12 구독 인증기관 무료, 개인회원 유료
This study established the evaluation index system of green logistics of Changjitu in Chinarelated to environment, resource, economics and technology. It derived the weight value of indexes by using AHP method analyzing interviews logistics researchers and surveys. Based on the results, the paper described the problems of Changjitu's green logistics and proposed some development suggestions.
4,000원
38.
2014.12 구독 인증기관 무료, 개인회원 유료
Due to the severe market conditions, pre-entrepreneur seeks to start their business through franchise company. This paper, using the data envelopment analysis(DEA) method, examines efficiency of a group of franchise company in order to provide efficiency information with pre-entrepreneur. Output-oriented DEA model is applied in the investigation of efficiency, and the overall efficiency score is decomposed into pure technical efficiency and scale efficiency. The input variables selected to evaluate the efficiency are franchise deposit, franchise contribution cost and the output variables are sales and number of franchises, and length of business. The results of this paper show franchise industry have the low level of overall efficiency and the main sources of inefficiency is found technical rather than scale. As a result, this paper provides not only the current status of efficiency information of a franchise with pre-entrepreneur but also give warning when they sign-up with franchise business.
4,200원
39.
2014.12 구독 인증기관 무료, 개인회원 유료
Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions (2×3×3). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.
4,000원
40.
2014.12 구독 인증기관 무료, 개인회원 유료
Fire detectors are designed to minimize loss of life from a fire alarm system as an alarm to help evacuate more quickly until the completion of the evacuation alarm should be continued. the purpose of such alarms in order to achieve the characteristic fire heat release rate reaches a certain level, or when a certain time has elapsed, when the heat detector is to be alarms to answer. Requires a quick response, it is desirable to install the sensor as much as possible, but taking into account the cost of installation problems by engineering approach to minimize the quantity and rapidity of detection capability should be increased. In order to increase the rapidity of fire detectors in a room according to the height of the sensing period is to be maintained the optimum distance of the fire detector detects characteristics should be considered. Differential spot-type heat detectors installed domestic basis, depending on the type of sensor that can detect one sensor area is limited and less than 4m ceiling height regulations and simply double the number in excess of 4m and intended to be installed
4,200원
1 2 3