In this study, we investigated how satisfaction with on-board training had an effect on career motivation of the trainees. For this purpose, satisfaction for on-board training and career motivation were used as variables. Satisfaction for on-board training were classified into education, environment and operation, and then measurement items were composed. Career motivation consisted of career identity, career insight and career resilience. To establish and test nine hypotheses, a questionnaire survey was conducted by 57 trainees who participated in the Gyeongsang National University on-board sailing training in 2021. To analyze the questionnaire responses, frequency analysis, factor analysis, multiple regression analysis and paired sample t-test were used. As a result of factor analysis, six factors for satisfaction for on-board training were derived. Among the factors, it was analyzed that satisfaction with assignments, the satisfaction with accommodation, and the satisfaction with the adequate condition of facilities and equipment had a significant effect on career motivation. In addition, it was found that career motivation significantly increased through on-board training as a result of comparing the difference between the averages of career motivation before and after on-board training.

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

The effects on the size selectivity for Muraenesox cinereus caught by coastal longline fishery were investigated in the southern coast of Korea from June 2 to 17, 2019. Four sizes of hooks (sizes 15, 17, 18 and 19) and two sizes of bait (sizes 9.9 g and 18.3 g) were tested in seven and three fishing trials, respectively. Such results revealed that smaller hook and bait size improved capture efficiency. And our results demonstrate that there was no significant size selectivity effect for hook size (ANOVA, p>0.05), but small bait improved on catching smaller fish (ANOVA, p<0.05).

The change of fishing power index was analyzed to identify the development of the vessel and gear technology that may improve the fishing efficiency of the offshore conger eel pot fishery from 1980s to 2015. Gross tonnage per fishing vessel was rapidly increased annually. The standard of pot was maintained, but the number of pot used rapidly increased by using conger eel pot hauling devices, carrying and loading devices, main line hauler, casting devices and slide type pot. Fish finder system to identify fishing ground information and the conger eel pot hauling devices were modernized, and supply rate was also increased. Therefore, the relative fishing power index in the offshore conger eel pot fishery increased from 1.0 in 1980 to 1.3 in 1990, to 1.8 in 2000 and to 2.0 in 2015. The results are expected to contribute to reasonable fisheries stock management of the offshore conger eel pot fishery.

Thousands of pelagic and demersal fishes inhabit the waters around Korea and many of them are overexploited. One of the reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the otter trawl fishery from 1960s to 2010s. Gross tonnage was decreased stably, but horse power was increased annually. The perimeter of net mouth was somewhat longer, but little changed. Color fish finder was utilized from the mid-1960s. Hydraulic net drum were introduced in the early 1990s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting research. Therefore, the relative fishing power index in the trawl fishery increased about two to three times in the 2010s compared to the 1980s. The results are expected to contribute to reasonable fisheries stock management.

In this study, we investigate the relationship between the peeling behavior of the backsheet of a photovoltaic(PV) module and its surface temperature in order facilitate removal of the backsheet from the PV module. At low temperatures, the backsheet does not peel off whereas, at high temperatures, part of the backsheet remains on the surface of the PV module after the peeling process. The backsheet material remaining on the surface of the PV module is confirmed by X-ray diffraction(XRD) analysis to be poly-ethylene(PE). Differential scanning calorimetry(DSC) is also performed to investigate the interfacial characteristics of the layers of the PV module. In particular, DSC provides the melting temperature(Tm) of laminated ethylene vinyl acetate(EVA) and of the backsheet on the PV module. It is found that the backsheet does not peel off below the Tm of ethylene of EVA, while the PE layer of the backsheet remains on the surface of the PV module above the Tm of the PE. Thus, the backsheet is best removed at a temperature between the Tm of ethylene and that of PE layer.

In this study, using a wet chemical process, we evaluate the effectiveness of different solution concentrations in removing layers from a solar cell, which is necessary for recovery of high-purity silicon . A 4-step wet etching process is applied to a 6-inch back surface field(BSF) solar cell. The metal electrode is removed in the first and second steps of the process, and the anti-reflection coating(ARC) is removed in the third step. In the fourth step, high purity silicon is recovered by simultaneously removing the emitter and the BSF layer from the solar cell. It is confirmed by inductively coupled plasma mass spectroscopy(ICP-MS) and secondary ion mass spectroscopy(SIMS) analyses that the effectiveness of layer removal increases with increasing chemical concentrations. The purity of silicon recovered through the process, using the optimal concentration for each process, is analyzed using inductively coupled plasma atomic emission spectroscopy(ICP-AES). In addition, the silicon wafer is recovered through optimum etching conditions for silicon recovery, and the solar cell is remanufactured using this recovered silicon wafer. The efficiency of the remanufactured solar cell is very similar to that of a commercial wafer-based solar cell, and sufficient for use in the PV industry.

This study is aimed to develop an improved shellfish dredge vessel considering the increase of the fishing safety and welfare of fishermen in Jeonnam province. We visited five fishing village societies in Korea, and conducted field surveys and survey questions to investigate the current status. In order to solve the problems presented by the investigation, a general arrangement of the improvement vessel was written and adopted after meeting between the fishermen and research team, and calculated the initial stability in five loading conditions by using the Napa program. As a result of field surveys and survey questions, the existing vessel have buoyant materials under the bow and the warp pass through the wheel-house. In addition, most fishing equipment and nets are concentrated on a narrow stern, making it difficult to work efficiently. According to the survey, fishermen also responded that operation of casting and hauling is very inconvenient. The fishing equipment of the improvement vessel was rearranged, the size of the wheel-house and the crew room was increased, and we secured a basic welfare space. As a result of the initial stability test, the stability criteria of the fishing vessel were satisfied in all loading condition.

The species composition and abundance variations of fishery resources in the adjacent marine ranching area, Tongyeong, Korea, were investigated by shrimp trawl, gill net, and longline during the period of July, September, and October in 2016. During the study period, the total catch were 8,522.9 kg with 34 species from the shrimp trawl, 32 species from the gill net, and nine species from the longline. The dominant species were different by gear, which were Hypodytes rubripinnis and Parapercis sexfasciata in the shrimp trawl, Platycephalus indicus and Raja kenojei in the gill net, and Conger myriaster and Scomber Japonicus in the longline. In terms of spatial distribution, Yongchodo showed the highest total catch in number as well as of in weight while Jukdo showed the lowest total catch in number and Bijindo showed the lowest total catch in weight. The amount of demersal fish resources in the survey area estimated as 301 ha, was 99,396 individuals which was converted to be 8,552.9 kg. The amount of demersal fish resources by gear were of trawling area, which area is 127 ha, were 76,251 and 3,489.5 kg, 74 ha in the gill net and longline survey area was 16,213 and 3,457.3 kg, and the other 100 ha area was 6,932 and 1,606.1 kg. In this study, the minimum resources for demersal fish is 61,687 and 4,265.2 kg, and the maximum is 149,439 and 14,197.9 kg.

This study was conducted in order to improve opening efficiency of the miniaturized small-scale net for anchovy boat seine gear to reduce the fleet size. Field experiment was performed to observe geometry of nets by catcher boats. When the distance between the two ships was 150, 300 and 450 m and the speed of towing nets was 0.6, 0.9, and 1.2 kt, the vertical opening and actual opening of each part of the miniaturized small-scale net was as follows: the front part of the wing net, 6.8-9.5 m, 45-63%; the middle part of the wing net, 16.1-30.7 m, 34-65%; the entrance of the inside wing net, 21.6-41.2 m, 44-84%; the square and bosom, 17.4-34.0 m, 38-75%; the entrance of the body net, 16.5-29.4 m, 36-64%; the entrance of the bag net, 14.5-21.9 m, 70-106%; the flapper, 6.7-7.7 m, 81-83%, and the end of the bag net, 8.6-10.9 m, 64-81%. The tension of towing nets was measured to be 2,734-6,812 kg approximately, which indicates that the fleet can tow nets with 350 hp, the standard engine horse power. The fishing operation time was shortened comparing to existent net with the large-scale buoy attachment operation. It was also possible to operate the ship without fish detecting boat.