검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 558

        1.
        2024.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 유색과 백색품종 토종오리의 성별에 따른 생산능력과 도체특성을 평가하고자 실시하였다. 1일령 토종오리 총 480수를 2개 품종(유색과 백색)×2개 성별(암컷과 수컷)로 총 4처리구의 4반복으로 반복 당 30수씩 평사에 나누어 8주간 사양실험을 진행하였다. 본 연구결과, 전체 사양실험기 간에서 토종오리의 체중, 증체량 및 사료섭취량은 품종(유색과 백색) 간 차이는 없었으나 수컷이 암컷보다 유의적으로 높았다(p<0.05). 이와 유사하게, 사료요구율은 유색품종과 백색품종의 차이가 없었으나 수컷이 암컷에 비해 유의적으로 개선됨을 확인하였다(p<0.05). 토종오리의 머리, 가슴육, 다리육 및 간의 무게는 처리구간 통계적 차이를 나타내지 않았다. 도체중량은 처리구간 차이가 없었으나, 도체율은 백색품종이 유색품종과 비교해 현저히 높았다(p<0.05). 또한 복강지방 무게는 수컷이 암컷에 비해 높았으며(p<0.05) 백색품종이 유색품종보다 높았다(p<0.05). 폐사율은 토종오리 의 품종과 성별에 따른 유의적 차이가 없었다. 본 연구결과는 토종오리의 육성기 단계에서 사육성적에 대한 기초자료로 이용될 것으로 사료된다.
        4,000원
        2.
        2024.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : This study aims to propose drone-command standard operating procedure (SOP) guidelines and Analyze their potential application to increase the use and utility of drones in urban disaster situations. Although the effectiveness and efficiency of obtaining disaster-situation information through drones have been verified by previous studies and practical experience, a survey of actual drone usability indicated a utilization rate of only approximately 4.13%. METHODS : To provide guidance for improving drone command SOPs, prior research and relevant literature were reviewed to identify commonalities between disaster-response command and control and drone use. A sample of 73 active-duty firefighters, including incident commanders (ICs) and drone pilots, were surveyed and interviewed. The data were analyzed and categorized to establish the reasons why drones are not actively used in urban disaster-response procedures. RESULTS : The primary reasons identified for not actively utilizing drones in urban disaster areas were the lack of a drone command and control system and the lack of clear criteria for when to use drones in disaster situations. In addition, many problems were found in drone-operation procedures, including emergency flight approval, securing takeoff and landing sites, and accident burden due to urban flight obstacles. To address the issues identified, standards were proposed for the type, size, and scope of urban disasters requiring drone response; for accident-prevention on basic missions and through flight safety procedures; and for installing a video transmission and reception system to easily share drone video information with ICs. CONCLUSIONS : Application of the drone-command SOP guidelines to actual urban disaster situations by disaster type will help to improve the efficiency of information acquisition and flight safety. This is expected to enable increased drone utilization. In future, extension of the research reported in this paper beyond the Seoul metropolitan area via additional follow-up studies has the potential to establish applicability of the proposed SOP guidelines to a wide variety of environments and organizational characteristics.
        4,000원
        3.
        2023.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 중공사형 이산화탄소 분리막 모듈을 사용하여 수소개질기 배가스로부터 이산화탄소 포집을 목적 으로 한 분리막 공정 최적화 연구를 진행하였다. 랩스케일의 소형 분리막 모듈을 사용하여 혼합기체를 대상으로 이산화탄소 순도 90% 및 회수율 90%을 달성하는 2단 공정 조건을 도출하였다. 막 면적이 정해진 모듈의 분리막 공정에서는 스테이지-컷, 주입부 및 투과부 압력에 따라서 포집 순도 및 회수율이 모두 다르게 나타나기 때문에 운전 조건에 대한 최적화가 필수적이 다. 본 연구에서는 다양한 운전 조건에서 1단 분리막에서 보이는 공정 포집 효율의 한계를 확인하고, 높은 순도와 회수율을 동시에 달성하기 위한 2단 회수 공정을 최적화하였다.
        4,000원
        4.
        2023.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Purpose: To determine whether artificial -intelligence quarantine robots can positively contribute to environmental management in medical institutions. We conducted in-depth interviews to understand the experiences of hospitalized patients receiving environmental management from such robots. Methods: Data were collected during March 20~May 20, 2023. individual in-depth interviews were conducted with 15 hospitalized patients, who could provide specific details of their experience of receiving environmental management from a quarantine robot. Results: Qualitative content analysis identified four themes, including “First encounter with an amazing and new quarantine robot,” “Efficiently performs non-face-to-face quarantine work in hospitals,” “Problems with quarantine robots,” and “Recommendations for improving the functionality of quarantine robots in medical institutions so quarantine robots and humans can coexist.” Conclusion: Currently, quarantine robots have limited functionality, and additional research is needed to identify various other functions in consideration of future infectious disease situations and the level of quarantine appropriate in a hospital.
        5,100원
        5.
        2023.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        상변화 물질(PCM)은 상전이 동안 에너지를 흡수하거나 방출할 수 있는 잠열 저장 물질로 활용된다. 최근 수십 년 동 안, 연구자들은 다양한 온도 적용을 위한 건설 물질로의 다양한 PCM의 통합을 탐구해 왔다. 그러나, PCM을 통합하는 콘크리트 의 기계적 및 열적 반응은 통합 방법에 의해 영향을 받는다. PCM을 콘크리트에 추가하기 위한 여러 기술이 제안되었다. 그럼 에도 불구하고, 콘크리트에 마이크로 캡슐화 PCM(m-PCM)의 통합은 종종 기계적 강도의 상당한 감소를 초래한다. 기존 콘크리 트에 m-PCM의 추가와 관련된 한계를 극복하기 위해, 예외적인 강도 및 내구성 특성으로 인해 초고성능 시멘트 복합체(UHPCC) 가 선호된다. 따라서, 본 연구에서는 기존 기술의 단점을 해결하기 위해 PCM을 통합한 신규 나노 엔지니어링 UHPCC를 개발하 였다. 또한, 시멘트 복합체의 기계적 및 열적 성능을 향상시키기 위해 다중 벽 탄소 나노튜브(MWCNT)를 추가하였다. 결과는 MWCNT의 포함이 기계적 성능을 향상시켰을 뿐만 아니라 시멘트 복합체의 열적 성능을 향상시켰다는 것을 보여 주었다.
        4,000원
        6.
        2023.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        포스트 코로나 시대에 방향성을 찾는 한국교회와 목회자에게 김홍도의 삶은 간결하지만 명확한 길을 제시해 준다. 교회의 역사가 증명하듯이 교회는 위기 상황 속에서도 말씀과 기도 안에서 해법을 찾고 하나님과 올바른 관계 설정을 통해 다시 세상으로 나아가며 성장했 듯이 이제 우리도 헌신의 원리들을 기억하며 다시 기도와 말씀에 전념하 며 영성의 삶을 회복하고 성령충만함 가운데 복음전도와 선교사역을 감당하며 그리스도의 사랑을 이웃과 세상에 나누는 일에 매진해야 할 것이다. 본 논문은 복음전도와 영적훈련이 헌신의 결과로 이어질 때 그 의미와 가치를 가질 수 있음을 강조한다. 오늘날 영적 갱신에 대한 필요는 깨닫고 있으나 그 과정에서 헌신과 노력을 게을리하는 현대 크리스천에게 김홍도는 헌신의 삶의 모습을 재조명한다.
        6,300원
        7.
        2023.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 산란후기에서 토종닭 산란계(KNH)와 하이라인 브란운 산란계(HBH)의 계란 품질을 비교하기 위해 수행되었다. 각 50마리의 KNH (Korean Rhode C, Korean Leghorn F, KNC Yellowish-brown 및 Korean Rhode D의 4원 교배종)와 HBH를 60~64주령까지 실험 케이지에 분배하였다. 실험 종료 시점에 각 그룹에서 30개의 계란을 분석하였다. 본 연구 결과, 난중은 KNH그룹에서 HBH그룹보다 통계적으로 낮았다(P < 0.05). 난각과 난백 중량은 KNH그룹이 HBH그룹보다 낮았으나(P < 0.05), 난황 중량은 KNH그룹에서 HBH그룹보다 높게 나타났다(P < 0.05). 난각의 강도와 두께는 KNH그룹에서 HBH그룹보다 낮았다(P < 0.05). 난형지수는 KNH그룹이 HBH그룹보다 높았다(P<0.05). 난황 지수와 색에서는 그룹 간 통계적 차이가 없었다. 종합적으로, 산란후기 KNH의 계란은 HBH의 계란에 비해 낮은 품질을 보였다. 국내 토종닭의 한정된 계통 숫자로 교배조합 측면에서 한계가 있기 때문에 교배종의 유전능력을 최대로 발현하기 위한 사양관리 차원(육종선발, 영양 등)의 추가적인 연구가 필요하다.
        4,000원
        9.
        2023.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        We attempted to provide an overview of the laws and current state of the 3D printing industry in South Korea and around the world, using the annual industry surveys and the Wohler report. Additionally, we reviewed articles relating to the potential exposure to hazards associated with 3D printing using metal materials. In South Korea, there were 406 3D printing-related businesses, employing 2,365 workers, and the market size was estimated at 455.9 billion won in 2021. Globally, the average growth rate of the 3D printing industry market over the past 10 years was 27.4%, and the market size was estimated at $11.8 billion in 2019. The United States had the highest cumulative installation ratio of industrial 3D printers, followed by China, Japan, Germany, and South Korea. A total of 6,168 patents related to 3D printing were registered in the US between 2010 and 2019. Harmful factors during metal 3D printing was mainly evaluated in the powder bed fusion and direct energy deposition printing types, and there is a case of material extrusion type with metal additive filaments. The number, mass, size distribution, and chemical composition of particles were mainly evaluated. Particle concentration increases during the opening of the chamber or post-processing. However, operating the 3D printer in a ventilated chamber can reduce particle concentration to the background level. In order to have a safe and healthy environment for 3D printing, it is necessary to accumulate and apply knowledge through various studies.
        4,000원
        10.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The object of this study is to feasibility assesment for co-digestion efficiency of food waste recycling wastewater(FWR) with thermal hydrolysis process dehydration cake (THP Sludge). As a result of THP pre-treatment experimental conditions to 160oC and 30 minutes, the solubility rate(conversion rate of TCOD to SCOD) of the THP sludge increased by 34%. And the bio-methane potential in the THP sludge increased by about 1.42 times from 0.230 to 0.328 m3 CH4/kg VS compared to the non-pre-treatment. The substrates of the co-digestion reactor were FWR and THP sludge at a 1:1 ratio. Whereas, only FWR was used as a substrate in the digestion reactor as a control group. The experimental conditions are 28.5 days of hydraulic retention time(HRT) and 3.5 kg VS/m3-day of organic loading rate(OLR). During the 120 days operation period, the co-digestion reactor was able to operate stably in terms of water quality and methane production, but the FWR digestion reactor deteriorated after 90 days, and methane production decreased to 0.233 m3 CH4/kg VS, which is 67% of normal condition. After 120 days of the experiment, organic loading rate(OLR) of co-digestion reactor was gradually increased to 4.5 kg VS/m3-day and operated for 80 days. Methane production during 80 days was evaluated to be good at the level of 0.349 m3 CH4/kg VS. As a result of evaluating the dehydration efficiency of the sludge before/after 150-180oC THP using a filter press, it was confirmed that the moisture content of the sludge treated before THP at 180oC was 75% and improved by 8% from 83-85% level. Therefore, it is expected that the co-digestion reactor of FWR and THP sludge will ensure stable treatment water quality and increase bio-methane production and reduction effect of dehydration sludge volume.
        4,500원
        11.
        2022.12 구독 인증기관 무료, 개인회원 유료
        수송은 양식어류의 양식과정에서 필수적으로 수행되며, 선별과 같은 물리적인 스트레스 요인 중 하나이다. 이러한 이유로 본 연구에서는 해산어류인 넙치를 이용하여 수송 시 염분, 수온 및 마취제의 영향을 확인하기 위해 수송 시 해수 염분(35‰, 15‰)과 수온은 20℃ (natural water temperature, NWT), 15℃ (cooling water temperature, CWT)로 설정하였으며 마취제(anesthesia, Anes., Sigma USA)는 50 ppm 희석하여 염분, 수온, 마취제 요인들을 혼합한 실험구를 설정하였 다. 실험구는 각각 NWT+35‰, CWT+ 35‰, NWT+15‰, CWT+15‰, NWT+15‰+Anes. 및 CWT+15‰+Anes.으로 설정하였다. 스티로폼 상자(66×42×20 cm)를 수송용기로 사용하였으 며, 해수 3 ℓ와 액화산소를 주입한 비닐봉지에 넙치 8마리씩 수용하여 수송하였다. 연구 결과 수송 전 코티졸 농도는 2.4±0.1 ng ml-1로부터 CWT+35‰ 구(16.7±12.8 ng ml-1)를 제외한 나 머지 실험구에서 유의하게 높아졌다. K+ 농도는 수송 전 3.1±0.0 mEq l-1로부터 NWT+15‰ 구에서 4.5±1.1 mEq l-1로 차이를 보이지 않았으나, 나머지 실험구에서는 모두 유의하게 높은 값을 보였다. 혈액성상의 변화에는 영향을 미치지 않았으며, 수온과 마취제는 스트레스를 유발 로 인한 삼투압조절에 부정적인 영향을 미쳤다. AST, ALT에는 영향을 미치지 않았다.
        4,000원
        16.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 패션업계에서 이슈가 되고 있는 Virtual Fashion 관련 서비스는 소비자들이 피팅 서비스를 사용함에 있 어 실제 상황과 상호작용하는 것처럼 의류의 재질감, 색상 그리고 사이즈를 실제적으로 경험해 볼 수 있게 하는 수단으로 활용되고 있다. 하지만 기존에 생산한 3D Object 데이터에 대한 접근성 및 재활용성이 낮은 단점을 가지고 있다. 또한 다양한 데이터 포맷을 사용하면서 생성되는 Texture의 용량과 출력되는 Animation 파일들의 크기가 커서 최종 결과물의 용량이 비대 해지는 단점도 있다. 본 논문에서는 기존 선행 연구된 시 스템을 Legacy Virtual Fashion System으로 정의하고 해당 시스템에서 사용하던 자원들을 효율적으로 재활용 하고 프로세스 단축 및 Texture과 Animation의 용량을 축소시키기 위하여 공통으로 사용할 수 있는 게임 엔 진 기반의 Virtual Fashion 프레임워크를 제안하고 구현했다. 게임엔진 기반의 Virtual Fashion 프레임워크를 이용하여 Virtual Show Room, 3D Runway 및 Virtual Fashion Sample을 제작하고 또한 해당 프레임워크의 성능 을 측정하기 위하여 실험을 구성했다. 구성된 실험으로 최대 50%의 용량 감소의 효과를 확인했다. 또한 본 연구의 결과물을 이용하여 다양한 형태의 출력물을 개발 확대 적용하는 것 기대해 본다.
        4,000원
        20.
        2022.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문은 교회개척자의 핵심역량 및 유용한 자산을 파악하기 위하여 전문가 델파이 조사방법을 활용하여 개척자의 주요역량을 파악 하고 역량 군에 따른 세부항목을 설정하여 개척자의 자산과 역량을 세분화하고 분석하는 작업으로 이루어졌다. 한국교회의 개척현실을 살펴볼 때 다양한 관점에서 개척자에 대한 연구의 필요성이 제기되기에 이 연구를 통해 개척교회 목회자의 기본 자질과 역량을 이해하고 이에 대한 평가항목을 설정해 궁극적으로 개척 목회자의 역할을 이해하는데 기초자료를 제공할 수 있으리라 사료된다. 교회개척자 역량 평가도구 개발에 전문가 델파이 조사 방식을 활용함으로써 외적 준거나 합리적인 공식이 마련되지 않은 교회개척자에게 요구되는 역량과 이를 평가할 수 있는 의미 있는 평가도구를 개발하는 점을 목표로 하였다. 이러한 평가를 통해 교회 개척 지원자가 전문가들이 제시하는 역량과 세부항목 을 구비하고 있는지 평가할 수 있는 계기를 마련하고자 하였으며 한국교 회가 가지고 있는 제한된 선교자원과 교회개척 지원 능력이 우선순위에 따라 꼭 필요한 곳에 배분되어 교회개척 사명을 효율적으로 감당되는 일을 목표로 하였다.
        7,800원
        1 2 3 4 5