검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 267

        61.
        2014.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 지식 경영의 관점에서 고령 인력이 조직에 갖는 의미에 대해 살펴보고 고령 인력들이 가진 지식과 경험, 연륜 등을 활용함으로써 조직이 고령화 시대의 이슈를 효과적으로 대체해 나갈 HR 방안을 모색해 보고자 한다. 이를 위해 고령화 관련 선행 연구 검토를 통해 고령화가 조직성과에 어떠한 영향을 주는지 살펴보았으며, 지식 경영 관련 문헌 연구를 바탕으로 그 동안 간과되어 왔던 지식 경영 관점에서 고령화가 지니는 의미에 대해 논의하였다. 이를 기반으로, 본 연구는 조직의 입장에서 고령 인력이 풍부한 지식과 다양한 경험 등을 다른 조직 구성원들과 해당 조직의 시스템으로 공유하고 전파할 수 있는 HR방안들로 대인 관계적 지식 전파 제도(멘토링과 OJT)와 조직 구조적 지식 전파 제도(학습조직/동아리와 직무순환제도)로 구분하여 이 제도들이 고령화와 조직성과 간 관계에 어떠한 영향을 주는지를 실증하였다. 분석 결과, 고령화 비중 증가는 조직성과 하락과 관계가 있는 것으로 나타났으며, 대인 관계적 지식 전파 제도 중 멘토링과 조직 구조적 지식 전파 제도 중 학습조직/동아리가 고령화와 조직성과 간 관계에 있어 조절 효과를 가지는 것으로 나타났다. 이러한 결과를 바탕으로 지식 경영 관점에서 조직 인력 구조의 고령화에 대한 재평가가 필요하며, 고령화 이슈를 보다 적극적으로 대처하기 위해서 지식 경영 관점에서 고령 인력들이 가진 가치 있는 지식들의 조직 내 전파 방안에 대한 고민과 실행이 보다 요구된다는 점을 강조하였다.
        6,100원
        62.
        2014.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The ozonation process has been widely used for drinking water disinfection around the world. Recently, the pressurized ozone contactor, in which the side stream typed ozone injection method is installed, has been applied to water treatment system. In this study, numerical calculations were conducted to compare prototype and screw-type ozone contactors based on hydraulic effectiveness in more details. The prototype ozone contactor was already installed and operated in domestic water treatment plant, and the screw-type is the suggested one for improving ozone contact efficiency installing the screw plate to the prototype. Screw turn numbers of screw plate were changed as 3, 5, 7 and 9, respectively for numerical simulation. The CT(concentration of disinfectant in mg/L times time in minutes) value was considered as one of the options for evaluating disinfection ability. From the results, it could be concluded that the performance of the screw-type is higher than that of the protype contactor by controlling the variable T as the tracer time. Also, Morill index of the screw-type(turn numbers = 5 ) appeared to be lower than the other.
        4,000원
        64.
        2014.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper presents a Computational Fluid Dynamics(CFD) based simulation and experimental tracer test of flow pattern and turbulent energy dissipation inside a serpentine flocculation basin with continuous operation. Research focused on the evaluation of a specific flow pattern on the hydraulic behavior on the flocculation basin. From the results of CFD simulation and actual tracer test, both results were in good accordance with each other. Also, each Morill index were calculated as 1.5 from CFD simulation and 1.7 from actual tracer test, respectively. Especially, turbulence energy was dissipated relatively higher in the vicinity of inlet to the flocculation basin than other region. The differences between the CFD simulation and actual tracer test were 1.4 min in T50, and 1.3 min in Tp, respectively.
        4,000원
        65.
        2014.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to suggest the methodology for improving the equity of flow distribution in open channel with multiple outlet, CFD simulations were carried out for actual scale distribution channel being operated in domestic G_WTP(Water Treatment Plant). Also, before and after installing the longitudinal multi hole(diameter=250 mm, 116 holes) baffle suggested by this research, turbidity measurements data were collected for evaluating the effects of hydraulic modification for inlet flow equity. From the both results, total turbidity of settled water was lowered by 30 % and equity of flow distribution was improved about 60 % compared with before hydraulic structure modification.
        4,000원
        66.
        2014.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 PVDF 중공사막을 열유도상분리와 연신의 복합공정에 의해 제조하였으며, 연신비에 따른 분리막의 구조 및 물성을 분석하였다. 이 분리막 제조의 메카니즘은 액-액 상분리에 기초하며, 최종 중공사막은 bicontinuous한 구조와 연신에 의해 fibrill 구조를 가지게 되어, 구정(spherulite)구조를 갖는 고-액 상분리막과 bicontinuous한 구조만을 갖는 액-액상분리막과 차별화된다. 우선, TIPS공정을 통해, gamma-butyrolacton, dimethyl phthalate (DMP), diethyl phthalate (DEP), di-butyl phthalate (DBP) 등을 단일 혹은 이들을 조합한 혼합 diluent로 사용하여, 냉각조건, PVDF와 희석제의 함량을 조절하면서 중공사막 전구체를 제조하고, 후속공정인 연신에 의해 최종적으로 중공사막의 외부표면을 porous하게, 혹은 dense하게 만들 수 있었다. 연신된 중공사막을 에탄올에 추출, 건조한 후 SEM을 통하여 pore 구조의 변화를 관찰하였으며, 수투과량, 다공도, 기공 크기, 표면 거칠기, 인장강도 등의 변화를 분석하였다.
        4,000원
        67.
        2014.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Decentralized water supply systems, treating the water in users’vicinity, cutting down the distribution system, utilizing the alternative water resources(rainwater harvesting, water reclamation and reuse and so on.) and saving energy and other resources, could be categorized into POU(Point-Of-Use), POE(Point-Of-Entry) and community small scale system. From the literature review, we could thought that decentralized water supply system and hybrid system(integrating centralized and decentralized water supply system within urban water management) might have strengthening comparative advantages to centralized system with respect to: (1) water security, (2) sustainability, (3) economical affordability. Even though it is difficult to derive and quantify direct benefit advantages from decentralized and hybrid system in comparison with centralized system, (1) operational cost reduction, (2) assurance for safe and stability water supply and (3) greenhouse gas reduction can be expected from successful establishment of the former.
        4,600원
        68.
        2014.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구를 통해 한국산(産) Nacoleia속(屬)은 6종으로 정리된다. 이 중 2종(Nacoleia inouei Yamanaka, 1980 및 Nacoleia satsumalis South, 1901)은 우리나라에서는 처음으로 보고된다. 본 고에서는 한국산 Nacoleia속의 기록종을 중심으로 분류학적으로 정리함과 동시에 한국미기록 2종에 대하여 외부형태 및 생식기특징을 도해하고, 채집지기록 및 국내외 분포정보 등을 제시하였다.
        3,000원
        69.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지구온난화로 인해 고산지역에 고립되어 서식하는 고산종은 감소할 가능성이 높다. 본 연구는 한라산 고지대에 서식하는 10종의 유존 나비종의 서식실태를 파악하기 위해 수행되었다. 고지대의 나비조사는 한라산 정상부의 초지에서 2007년부터 6년간 실시하였다. 유존종의 나비가 저지대에 나타나는 지 확인하기 위해 2012년에는 저지대의 2곳에서 조사를 하였다. 나비는 선조사법으로 조사하였다. 10종의 유존 나비종들은 고지대에서는 관찰이 되었으나, 저지대에서는 관찰되지 않았다. 이들 종들은 대부분 개체수가 많고 개체군의 안정성이 다른 나비들에 비해 낮지 않았다. 밀도 변화를 분석한 결과 유존종의 나비들이 감소하거나 증가하는 경향은 나타나지 않았다. 따라서 기후변화의 영향은 아직은 유존 나비종의 개체군에 명확하게 나타나지는 않았다. 본 조사결과와 우리나라의 출현자료를 토대로 각 유존종에 대한 취약성 평가를 하였다.
        4,000원
        71.
        2013.10 구독 인증기관·개인회원 무료
        상제나비는 유라시아 대륙 대부분에 분포하는 광역분포 종으로, 남한과 인접한 북한 또는 아무르 지역 등의 동북아 지역에 비교적 풍부한 집단을 유지하고 있으므 로 종 자체의 보전 가치가 낮을 수도 있다. 하지만, 남한의 원 집단 분포지는 소수였 으며, 인간 간섭이 그의 급감한 원인이었기 때문에 곤충자원의 관리와 보전 노력이 매우 시급한 종이다. 이에 남한산 상제나비의 28년 된 장기 건조표본을 이용하여 DNA 바코드 염기 서열을 최초로 분석하고, 이를 유라시아 10 지역 개체군 36개체 들과 COI 특성을 비교해 보았다. 이들 개체군에서 총 5개의 haplotype을 확인하였 고, haplotype I은 75%로 가장 높은 빈도를 나타내었으며, 유라시아 전 지역에 광범 위하게 분포하고 있음을 확인하였다. 남한산 개체들은 모두 haplotype I에 속하고 있어 COI 유전자 상에서는 지역 고립성이 없는 것으로 밝혀졌다. 이 결과로 추후 남한산 상제나비 보전 및 복원은 타 지역 개체군 중 동일 haplotype 선별이 필수 요 건으로 판단되나, 좀 더 정교한 평가를 위해서는 추가적인 마커를 이용한 분석이 필 요할 것으로 제안한다.
        72.
        2013.08 구독 인증기관·개인회원 무료
        본 연구는 알루미늄 폼 복합재료로 접합된 TDCB 모델에 대해 구조적 시뮬레이션 해석을 하였다. 이 해석을 통하여 등가응력, 변형 에너지 및 접착부의 압력에 대한 자료를 얻었다. 또한 실험을 하여 해석 자료에 대한 검증을 하였다. 본 연구의 자료를 통해 알루미늄 폼 재질로 접합된 실제 복합재 구조물에 적용시켜 파괴거동을 분석하고 그 기계적인 특성을 파악할 수 있다.
        73.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        친수성 단량체를 polyvinylidene fluoride (PVDF) 분리막 표면에 열중합으로 lamination하여 분리막을 친수화하였 다. 친수화 처리 후 접촉각은 95°에서 55°까지 감소하였고 수투과량은 10배 이상 증가하였으며 bovine serum albumin (BSA) 흡착량은 1/4 수준으로 감소하였다. 열중합 공정에서 각 공정변수별 영향을 조사하였고 이를 최적화하였다. 단량체 중 dimethyl oxobuthyl acrylamide (DOAA)가 친수성이 높아 다른 단량체에 비하여 친수화 효과가 우수하였다. 단량체의 농도가 증가함에 따라 성능이 향상되었으나 30 wt% 이상의 경우 homopolymerization을 유발하여 성능을 저하시켰다. 개시제로 사용 되었던 azobis (isobutyronitrile)(AIBN)의 활성 온도 범위가 benzoyl peroxide (BPO)의 활성온도 범위보다 넓기 때문에 높은 친수화 효율을 나타내었다. 개시제를 먼저 도포시켜주고 단량체를 나중에 첨가하는 2단계 lamination 방식이 일괄 공급하는 1단계 방식보다 친수화도는 크게 향상됐지만 pore blocking현상이 나타나면서 순수투과도는 매우 감소하였다.
        4,000원
        74.
        2013.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        four kinds of models designed by the basis of British industrial standard and ISO international standard in this study. Energy release rates at mode 1 are investigated by the fatigue analysis of aluminum foam TDCB model bonded with adhesive. These analysis models are compared each other by classifying four models into m values with 2, 2.5, 3 and 3.5. The value of m as the gradient of model is represented with the function of crack length(a) and height of model(h). Through the correlation relation, the fracture behavior of bonded material is analyzed and these analysis results can be applied to composite structures of various areas. Mechanical property and fracture toughness of composite material are also analyzed in this study.
        4,000원
        75.
        2013.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Magnetic and dielectric properties of rubber composites are controlled by using two kinds of high-permeability metal particles with different electrical conductivity (Sendust, Permalloy), and their effect on microwave absorbance has been investigated, focusing on the quasi-microwave frequency band (0.8-2 GHz). Noise absorbing sheets are composite materials of magnetic flake particles of high aspect ratio dispersed in polymer matrix with various filler amount of 80-90 wt.%. The frequency dispersion and magnitude of complex permeability is almost the same for Sendust and Permalloy composite specimens. However, the complex permittivity of the Permalloy composite (, ) is much greater than that of Sendust composite (, ). Due to the large dielectric permittivity of Permalloy composite, the absorbing band is shifted to lower frequency region. However, the investigation of impedance matching reveals that the magnetic permeability is still small to satisfy the zero-reflected condition at the quasi-microwave frequency band, resulting in a small microwave absorbance lower than 10 dB.
        3,000원
        76.
        2013.04 구독 인증기관 무료, 개인회원 유료
        본 연구는 전 세계적으로 심화되고 있는 갯녹음의 발생 현황과 아열대 및 열대해역에서 우점하는 산호류의 심각한 산호백화 현상의 분포 정도를 파악하였다. 갯녹음이 발생하는 원인은 물리적, 화학적 및 생물학적 원인으로 나눌 수 있으며, 매우 다양한 원인에 의해 갯녹음이 발생하는 것으로 나타났다. 국내에서 발생한 갯녹음은 점점 증가하고 있으며,실제 진행 중인 면적은 이보다 훨씬 많을 것으로 예상된다. 또한 산호백화 현상은 전 세계 연안에 걸쳐 발생하고 고 있으며..
        3,000원
        78.
        2013.04 구독 인증기관·개인회원 무료
        한국은 분단된 현실로 인하여 휴전선 접경지역에는 많은 군사훈련장이 있다. 이 들 군사훈련장은 남한에서는 가장 기온이 낮고, 초지가 발달되어 있기 때문에, 최 근 기후변화와 식생변화로 인해 밀도가 급격히 감소하고 있는 북방계 초지성 나비 에게는 좋은 서식처가 될 것이다. 이러한 가설을 검정하기 위해서 군사훈련장과 그 주변의 산지의 나비를 2008년부터 2011년 4월부터 10월까지 매월 일회씩 선조사 법으로 조사하였다. 조사결과 총 97종 2,339개체의 나비가 관찰되었다. 군사훈련 장(82종 1,956개체)이 산지(62종 383개체)보다 종수와 개체수 모두 높았다. 우점 종을 비교한 결과, 군사훈련장은 노랑나비, 암먹부전나비, 애물결나비였지만, 산 지는 줄흰나비, 줄꼬마팔랑나비, 먹그늘나비로 종구성이 전혀 달랐다. 군사훈련장 에서는 국내에 다른 지역에서 보기 힘든 북방계 초지종인 북방기생나비, 산은점선 표범나비, 담색어리표범나비, 개마별박이세줄나비 등을 많이 관찰할 수 있었다. 따 라서, 휴전선 접경지역의 군사훈련장은 북방계 초지성 나비가 서식할 수 있는 환경 조건을 제공하는 것으로 판단된다.
        79.
        2013.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study aims to analyze the structural behavior on TDCB models bonded adhesively with aluminum foam composite. These simulation models are designed on the basis of British industrial and ISO standards. The variable of configuration factor(m) is set up to investigate the fracture toughness of bonded joint due to the volume of material. Equivalent stress, deformation energy, pressure at bonded part, reaction force-crack length, energy release rate-crack length are obtained by this analysis. Through the data of this study, the fracture behavior can be analyzed by applying the practical composite structure bonded with aluminum foam and the mechanical property can be understood.
        4,000원
        80.
        2013.02 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The study of grinding behavior characteristics on aluminum powders and carbon nano tubes (CNTs) has recently gained scientific interest due to their useful effect in enhancing advanced nano materials and components, which significantly improves the property of new mechatronics integrated materials and components. We performed a series of dry grinding experiments using a planetary ball mill to systematically investigate the grinding behavior during Al/CNTs nano composite fabrication. This study focused on a comparative study of the various experimental conditions at several variations of rotation speeds, grinding time and with and without CNTs. The results were monitored for the particle size distribution, median diameter, crystal structure from XRD pattern and particle morphology at a given grinding time. It was observed that pure aluminum powders agglomerated with low rotation speed and completely enhanced powder agglomeration. However, Al/CNTs composites were achieved at maximum experiment conditions (350 rpm, 60 min.) of this study by a mechanical alloy process for Al/CNTs mixed powders because the grinding behavior of Al/CNTs composite powder was affected by addition of CNTs. Indeed, the powder morphology and crystal size of the composite powders changed more by an increase of grinding time and rotation speed.
        4,000원
        1 2 3 4 5